Washing machine Valve

Parameters of Washing machine Valve

When an angle valve is used as a shut-off valve for residential plumbing fixtures, it is called an angle stop valve, or simply an angle stop.

Additional information


Polishing and Chrome plated


CW602N, H58-3, Lead-free brass


1/2", 3/8"



Thread connection


Working pressure

12 bar


Zinc alloy



Life time:

300000 times On-Off

Details about Washing machine Valve

Washing machine valve and WC Valve with 1/2″x3/8″x3/4″


  • With a nonreturn flap and rosette, high durability, and a luxurious look.
  • Size 1/2″ X 3/4″X3/8″
  • It’s with plastic bag packing by each
  • Max work temperature; -5-90℃
  • Forged brass body
  • Polished and chrome plated
  • Nominal pressure: Max 12 bar
  • Multi-function design can be used for washing machine & under basin both
  • 100% pieces leaking tight test before shipment
  • Easy clean and replace filter design
  • Contemporary brush finish angle stop valve puts a premium touch on those old ugly pipe fittings for the sink, bathroom, toilet, and shower.
  • Suitable for water supply systems, civil construction piping systems
  • It can be used as a shut-off valve or water saver valve and installed between the shower arm and the showerhead to control the flow of water
  • Function: Kitchen, Home, Garden, and General
  • Style: Handle-controlled
  • Solid stainless steel construction, rust-resistant, sturdy and durable

    Washing machine valve and WC valve

    Wash machine Valve Size


    Valve pressure


    Valve Materials

    DR brass, Normal brass, Lead-free brass

    Valve Standards

    BS2779,EN331,ISO228,DIN 259

    Working Temperature:

    From -5 ℃ To +90 ℃

    Seat sealing Material:


    Handle Material:

    Zinc Alloy, Plastic

    Thread connection:

    ISO228,BS2779,DIN 259, ASME B1.20.-1983 Pipe Thread

    Quality/valve Certifications



    Polished and chrome plated


    Brass cartridge

    Valve operator



    Outlet water valve

    O ring


    Salt spray test

    Acetic acid/ASS 24 hours

Introduction: Washing machine and WC valve

A washing machine is a household appliance that is used to wash clothes. The washing machine has a tub or drum where the clothes are placed. The tub is filled with water and detergent, and the clothes are washed by agitation. Most washing machines also have a spin cycle in which the clothes are spun to remove excess water.

A WC valve is a valve that is used to control the flow of water in a toilet. The WC valve is located at the bottom of the tank and controls the amount of water that goes into the bowl.

What are a washing machine and WC valve?

If your home has a washing machine and you need to know how to fix a problem with the WC valve, this is the article for you.

We will show you how to identify the most common problems with WC valves and how to fix them. We will also provide some tips on preventative maintenance.

The benefits of using a washing machine and WC valve

A washing machine is a household appliance that most people use daily. It is an essential part of doing laundry. Many people don’t know the benefits of using a washing machine and a WC valve.

The benefits of using a washing machine are many. One benefit is that it can save you time. You can set the timer and leave the room while it washes your clothes. This is especially helpful if you have a large load of laundry.

Another benefit is that it can save you money in the long run. If you wash your clothes by hand, it will take longer and use more water.

Finally, using a washing machine can extend the life of your clothes.

The types of washing machines and WC valves

There are two types of washing machines: front-loading and top-loading. Front-loading washing machines are more expensive but use less water and energy. Top-loading washing machines are less expensive but use more water and energy.

WC valves are used to control the flow of water in a toilet. There are two types of WC valves: flush valves and fill valves. Flush valves are located at the bottom of the toilet and control the amount of water flushed into the bowl. Fill valves are located at the top of the toilet and control the amount of water that is filled into the bowl.

How to use a washing machine and WC valve

A washing machine is a household appliance typically used to wash clothing. The first washing machines were manual and operated by hand. Today, most washing machines are automatic and use electricity. Many modern washing machines also have a built-in spin dryer.

To use a washing machine, you will need to add laundry detergent to the machine. You can either pour the detergent into the machine or the drawer, where it will be dispensed automatically. Then, add your dirty laundry to the machine. Ensure not to overload the machine, as this can damage your clothes and the machine itself. Once you have added your laundry, select the appropriate cycle and start the machine.

If your washing machine does not have a built-in spin dryer, you need to transfer your wet clothes to a separate tumble dryer or hang them up to air dry.


Angle Valve Spare parts:


Spare parts of a product are copies to replace the original damaged parts. If your angle valve gas has any problem, you can change that part instead of replacing the whole valve. Angle valves spare parts are easy to access and cost less than a new valve.


We will discuss the most critical angle valve spare parts to replace with a new piece.


Seal kits:


A seal kit is a physical object that contains lip seals and sealing rings to use as a spare part of a mechanical device. They are an essential part of angle valves as they are responsible for protection against leakages in hydraulic fluid movement. Most commonly, companies use some soft material in manufacturing seal kits. It makes them fit well in their place to fill out any space.


They play a crucial role in the successful working of an angle valve. There must be no space to leak water for fluid separation and blockade. It can be damaging at times. Especially during a repairing time when fluid loss can redirect the process.


Seal kits offer a variety of benefits and marks among the essential angle valve spare parts. The material they contain as a core ingredient can bear high-pressure conditions. It means it endures a significant pressure range without breaking itself.


Secondly, the product is malleable and nonmetallic. It ensures a much longer life span as the pressure on metals can cause difficulty. But, this material is not easily affected by the all-time water presence as it is more durable.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?