Diverter Angle Valve 3 Way

Parameters of Diverter Angle Valve 3 Way

When an angle valve is used as a shut-off valve for residential plumbing fixtures, it is called an angle stop valve, or simply an angle stop.

Additional information


Polishing and Chrome plated


CW602N, H58-3





Thread connection


Working pressure

12 bar





Life time:

300000 times On-Off

Details about Diverter Angle Valve 3 Way

Brass Diverter Valve 3 Way 


  • Size 1/2″ X1/2″ X1/2″
  • Material: Brass
  • Surface Treatment: Chrome plated
  • Style: Handle-controlled
  • It’s with plastic bag packing by each
  • Three million times open-off  working is guaranteed
  • Solid brass construction, rust-resistant, sturdy and durable
  • Use for a shower head, hand shower, or bidet sprayer
  • It can be used as a shut-off valve or water saver valve and installed between the shower arm and the shower head to control the flow of water
  • Function: Kitchen, Home, Garden, and General
  • It is T shape adapter of a universal showering component with 3 way, One G 1/2 female inlet(Water Inlet),
  • Two G 1/2 male outlets(Water Outlet) and the diverter with standard G1/2 connector fit almost all home water systems.
  • The shower hose splitter is a G1/2 inch (20mm) three-way shower arm diverter for shower arm mounted.
  • Connector connection design & 360° rotary union design, the female inlet can easily connect to or remove from the shower arms.

Bellows are highly helpful in the case of industrial use. Chemicals and explosive materials can be fatal due to fire risks. Bellows have high-end security by protecting pipes from even a tiny space for leakage.


Experts recommend bellows in nuclear power plants and water plants. Nuclear Energy generation is a sensitive process to deal with care. A small leakage of chemicals into the combustion area can lead to the explosion of the whole plant. Bellows ensure safety in such circumstances.

Introduction: what is an angle valve two-way?

A stop angle valve regulates the flow of liquids or gases. It is one of the most common valves used in industrial and commercial applications. Stop-angle valves are available in various sizes and materials, but they all operate similarly.

The basic design of a stop angle valve consists of two ports, an inlet, and an outlet, connected by a passageway. The passageway has a hole that can be opened or closed by a movable plug. When the plug is open, fluid can flow freely through the valve. When the plug is in the closed position, fluid flow is blocked.

Stop angle valves are classified as either two-way or three-way valves depending on how many ports they have.




Springs come in most angle valve types. The primary purpose is to save the valve from bouncing as it remains fastened to the valve stem. It ensures the protection of equal pressure to the valve and control of the valve train. The functions of springs make them consistently valuable among angle valve spare parts.


The valve bounce can severely damage the system, breaking the pipelines from the inside. It displays how crucial springs can be to prevent such damage.


They play a vital role in the combustion where workers need meticulous attention. They maintain a fair balance in releasing chemicals by keeping equal pressure on all parts.


High and irregular pressure on parts of the valve affects the performance. And can also cut its lifetime. The survival of valves needs to keep the tension balanced. Generally, cylindrical springs are more in use than any other type. Yet, this might change to fit a particular type of angle valve.


Industries, in particular, use spring valves to a large extent. It’s because of their striking ability to endure the valve infrastructure. These main reasons cause its high demand in industries and custom use.

Materials of Valve Parts from Plumberstar

No. Part Materials
1 Body Brass
2 Cartridge Brass
3 Structure Three-way
4 Seal EPDM/cartridge
5 Seal Gasket NBR
6 O ring NBR
7 Thread BSP, G 1/2″x1/2″x1/2″
8 Handle Wheel Zinc Alloy
9 Finish Polishing and Chrome plated



Moving forward to another well-known and efficient angle valve spare part. The gasket is a product that acts as a seal to fill up the space between more than one surface. It indicates that gaskets fill up the emptiness in valves to seal them completely. Their function is to make a valve that blocks the fluid paths when needed.


Most of the valve types come with a gasket installed within them. Yet, fewer types are available to use an extra gasket when required. Gaskets are a great source of reducing friction between the angle valve spare parts. This friction saves the valve components from damage. And sometimes prove to be safer to handle.


Gaskets are available in various materials. It can be metal, plastic, rubber, etc., depending upon their application in a specific place. We noticed the presence of rubber gaskets more often for angle valves. It is because of their durability, flexibility, and longer life span.


Manufacturer companies produce them for commercial and custom use regularly. We use gaskets in almost every mechanical device. But, their significance for angle valves is essentially unavoidable.

Three-way valve

Angle Valve Size


Valve pressure

PN10 (145 Psi)

Valve Materials

CW602N, Normal brass

Valve Standards

BS2779,EN331,ISO228,DIN 259

Working Temperature:

From -5 ℃ To +90 ℃

Seat sealing Material:


Handle Material:


Thread connection:


Quality/valve Certifications

CE, ISO9001


Polished and Chrome plated


Brass cartridge

Valve operator



Shower valve

O ring


Salt spray test

Acetic acid/ASS 24 hours

Read more on the Functions Of GASKETS. 

Angle valve Material:

Angel valve material matters a lot to use at a certain point. They are available in various materials, such as brass, bronze, and metallic plastic. They all have their importance depending upon their use. I have categorized angle valves for you based on their material. It will be helpful to decide which of these you should go for yourself. Let’s check the angle valve material.

Copper Angle Valve:

Copper is known as the best angle valve material. Its services are more excellent than any other metal used in angle valves. It gives a great shiny look to the product. The use of copper in angle valves has the following benefits;

Angle valves have to face liquids, including chemicals and water. Angle valve material should have high resistance to meet these requirements.

  • Copper is the best metal for this use. It has a natural ability to resist corrosion. It means even if valves are open 24/7 for flow, they will not affect its material.
  • It means its shapes can change by applying force. We can create any desired product shape using copper.
  • Brass valves can easily survive dull acids and chemicals. Water having acidic pollutants can use copper angle valves in its passageway.
  • Angle outlet water valves are available in the market on a vast scale. A wide variety of shapes are present that disclose specific features.
  • For commercial and industrial purposes, copper is a highly trusted material.

These specific qualities of copper make it stand above other material valves.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?