1/4 Turn Ceramic Valve

Parameters of 1/4 Turn Ceramic Valve

When a quarter turn angle tap is used as a shut-off valve for residential plumbing fixtures, it is called an angle cistern water tap, or simply an angle stop.

Additional information


Polishing and Chrome plated


CW602N, H58-3





Thread connection


Working pressure

150 PSI, 16 bar


Zinc alloy



Life time:

300000 times On-Off

Details about 1/4 Turn Ceramic Valve

90° degree Turn Ceramic Valve


  • Shutoff angle stop valve
  • Size: 1/2″ X 1/2″
  • Name:  Cistern tap
  • Body Material: Brass

Quarter-turn angle valves are an alternative name for 1/4-turn ceramic disc valves. Conventional taps and valves are known as multi-turn valves, which rotate 360 degrees to open or close. However, 1/4-turn or quarter-turn valves are an advanced variety.

Rotating at a 90° angle means 1/4 turn angle valves can be opened or closed entirely. Consequently, they traverse considerably less rotatory motion than conventional ones. Ceramic disc valves with a 1/4 turn are more effective, fast, and efficient. They serve the purpose of either controlling or obstructing the flow of liquid. This valve variety consists of two apertures. The other is designed to be installed in a shower or fixture, while the former is connected to the main supply.

Liquids pass through a 90° angle between the inlet and outlet and penetrate the valve through an aperture. The disc, sometimes present in the valve, functions as a fluid regulator and, at times, as a seal, such as in butterfly valves.

Why You Ceramic Discs?

1/4 turn ceramic valve
1/4 turn ceramic valve

Ceramic discs are renowned for their remarkable longevity and corrosion resistance, both critical attributes for any water system valve. Their capacity to create a secure seal prevents leakage, conserving water and diminishing the likelihood of damage.

In the long run, Ceramic Disc Technology is a cost-effective option because it not only withstands extreme temperatures and severe water conditions but also assures a seamless operation.

What Is the Significance of the Angle Design?

The angle valve’s design enables a 90-degree change in the direction of water flow. This is essential in locations where a directional change in the piping lines is required. Additionally, the design facilitates straightforward access to the valve for maintenance or operation, an essential attribute in confined or inaccessible areas.

Moreover, angle valves are ideal for securing fixtures in isolation, allowing for replacement or repair without disrupting the water supply to other areas.

Often, an angle valve is installed at the point where a water conduit exits a wall to supply a fixture. A quarter-rotation of the valve handle activates water flow by aligning the ceramic discs; an additional quarter-rotation in the opposite direction blocks the flow path and deactivates the water supply. This valve type is highly regarded for its dependable sealing, swift and effortless operation, and extended lifespan.

Types Of 1/4 Turn Ceramic Disc Angle Valve

We shall now examine the various varieties of product material. Let’s explore multiple varieties of ceramic disc angle valves with a 1/4-turn.

1/4 turn ceramic valve
1/4 turn ceramic valve

1/4 Turn Copper Ceramic Disc Angle Valve:

Copper is this quarter-turn valve’s parent material and finish, making it ideal for restrooms. It is resilient, versatile, and highly resistant to heat.

Changes in relative pressure can affect copper. The material in question is the user’s preferred choice for commercial use. Copper quarter-turn valves are gaining in popularity daily. They contribute to an aesthetically pleasing ambiance when installed in restrooms. An old compression valve may be suitably replaced with a 1/4-turn copper ceramic disk angle valve.

The item under consideration is a faucet valve. We incorporate touches that rotate it by 90° rather than 360°. It is highly effective and, if damaged, is simple to replace.

1/4 Turn Ceramic Brass Angle Valve:

This quarter-turn valve is made of brass, as its name implies. Bathrooms and kitchens are suitable locations for this compact fixture. The 1/4 turn valve, constructed entirely of brass, is ideal for water management. It remains durable for years without deteriorating. They resemble angle valves in the form of threads.

Turn Brass 1/4 Ceramic disc angle valves are capable of withstanding tremendous pressure. Their efficacy remains unaffected even when exposed to elevated temperatures. This angle valve can be installed in kitchens and restrooms to regulate liquid passage. They may be operated with ease. We can rapidly turn it on or off in an emergency due to the design of the quarter-turn valve.

Stainless Steel 1/4 Turn Ceramic Disc Angle Valve:

Plumbing products are rendered brilliant and lustrous by stainless steel. Stainless steel is the most frequently used material in kitchens and restrooms. This is attributed to its enduring characteristics. It required less maintenance.

A sealant, regulator, and quarter-turn stainless steel valve are multifunctional. Less time is required to operate. The corrosion resistance of this valve is exceptional. Therefore, water management is the most suitable option. It is leakproof and shows no signs of quality deterioration shortly. Let’s examine the specifications of it.

Advantages of 1/4 Turn Ceramic Disc Angle Valve:


The quarter-turn ceramic disc angle valve is economical. It is comprised of ceramic discs, providing a vast selection. Constantly replacing valves with products that feature these discs is a thing of the past. However, it offers long-lasting service for your residence without incurring excessive costs.

Less Leaks:  

Standard shutoff valves typically have one disadvantage: the absence of invisible leaks. Their body develops imperceptible breaches that are not visible to the naked eye. These breaches continue to damage the valve until it ceases to function entirely. The flexible construction of 1/4-Turn Ceramic Disc Angle valves conceals leaks. If leaks occur, they become visible and can be treated without delay.

Ease Of Use:

The quarter-turn feature is highly user-friendly. It completes the task in seconds. Furthermore, it prevents any atypical twisting or rotating. It rotates a mere 1/4 time. Fluid discharge can be easily regulated or turned off. The efficiency and popularity of these quarter-turn valves are primarily attributable to the ceramic disc that supports them.

Lifetime Service:

Quarter-turn valves utilize minimal surface area in operation. It indicates that user contact takes up less space. Because of this characteristic, 1/4-turn ceramic disc valves have an extended service life. They are frequently described as “service-providing valves for a lifetime.

Reduced Error Duration:

Very few typical defects have been reported with 1/4 turn ceramic disc angle valves, in contrast to other valve types. Without turbulence, they frequently maintain a high level of performance. Quarter-turn valves require only minimal upkeep due to their robust construction.

1/4 Turn Ceramic Disc Angle Valves represent an ideal revolution for manufacturing. It has an aesthetically pleasing design, a highly efficient valve, and numerous other attributes. It provides a wide variety of materials from which to choose. In the current era, turn valves are a prudent selection owing to their numerous advantages.

They apply a brand-new finish to your kitchens and bathrooms. 1/4-turn ceramic disc angle valves find utility in various settings, including kitchens, bathrooms, showers, lavatories, and laundry machines. Their heavy-duty models are suitable for industrial applications.


Determining the proper valve is critical for guaranteeing the proper operation of a plumbing system. The 1/4-turn ceramic disc angle valve simplifies water flow control and guarantees a dependable, long-lasting solution. Ceramic disc technology and an angled design, among other attributes, render it a valuable investment for individuals seeking to improve the efficacy and reliability of their piping systems. Consider replacing your outdated plumbing fixtures with 1/4-turn ceramic disc angle valves. Feel free to contact Plumberstar for product details and orders.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?