Toilet Fill Valve Replacement

Parameters of Toilet Fill Valve Replacement

When an angle valve is used as a shut-off valve for residential plumbing fixtures, it is called an angle stop valve, or simply an angle stop.

Additional information

Finising:

Polishing and Chrome plated

Materials:

CW602N, H58-3, Lead-free brass

Size:

1/2", 3/8"

Temperature:

-10˚C-100˚C

Thread connection

BSP, NPT

Working pressure

12 bar

Handle:

Zinc alloy

Cartridge:

Brass

Life time:

300000 times On-Off

Details about Toilet Fill Valve Replacement

Toilet Fill Valve Replacement

JX-0209

  • Toilet valve replacement
  • Size 1/2″X3/4″
  • ABS handle, Zinc alloy handle
  • Sandblasted, Nickel plated, Chrome plated
  • Brass body with fast-open
  • The package is with one box&one pc
  • Max work temperature; -10-100℃
  • The max working pressure; is 10 bar
  • Solid brass construction, rust-resistant, sturdy and durable
  • G1/2″(15mm) Inlet, G1/2″(15mm) outlet
  • Simple to install and simple to use
  • Contemporary brush finish angle stop valve puts a premium touch to those old ugly pipe fittings for sinks, bathrooms, toilet kitchen showers.
  • It comes with a 1-year warranty.
  • Quarter turn water shut-off valve means more effortless shutoff open close and only need to turn 1/4 way.
  • Suitable for water supply systems, civil construction piping systems
  • It can be used as a shutoff valve or water saver valve and installed between the shower arm and the showerhead to control the flow of water
  • Function: Kitchen, Home, Garden, and General
  • Style: Handle-controlled
  • The short switch design is not visible behind the small size showerhead
  • Solid stainless steel construction, rust-resistant, sturdy and durable
  • The black appearance has luxurious temperament elements, which is convenient for use and installation

    Introduction: why you may need to replace your toilet fill valve

    If your toilet is constantly running or isn’t flushing properly, you may need to replace the fill valve. The fill valve is the part of the toilet that controls water flow into the bowl. It’s usually located under the tank, behind the flush handle.

    Replacing a fill valve is a fairly easy do-it-yourself project. You can find replacement valves at most hardware stores. Be sure to get one that’s compatible with your toilet model.

    To install the new valve, simply remove the old one and screw in the new one in its place. Then, attach the refill tube to the new valve and turn on the water supply. Test your handiwork by flushing the toilet several times. If everything is working properly, there should be no leaks, and the bowl should fill up quickly with water.

    Step 1: turn off the water in your toilet

    If your toilet is constantly running or not filling up properly after each flush, it’s time to replace the fill valve. The fill valve is the part of the toilet that controls how much water enters the tank after each flush.

    Begin by shutting off the water to your toilet. There should be a shut-off valve on the wall behind your toilet, or you may need to shut off the water to your entire home. Once the water is shut off, flush the toilet to empty out as much water from the tank as possible. Next, unscrew the fill valve from the top of the tank and remove it.

    Take your new fill valve and screw it into place. Be sure to hand-tighten only; using tools could damage the valve. Turn on the water supply and check for leaks around the base of the valve.

    Step 2: remove the old fill valve.

    First, remove the old fill valve, and turn off the water at the shut-off valve. Then, flush the toilet to empty the tank. Next, disconnect the supply line from the valve by unscrewing the nut that secures it. Finally, remove the mounting bracket that holds the fill valve in place and lift out the old valve.

    Step 3: Install the new fill valve.

    If a slow trickle or lack of water flow comes out of your toilet bowl when you flush, it may be time to replace the fill valve. This is a relatively easy do-it-yourself project that anyone with basic plumbing skills can accomplish in about an hour. You will need to purchase a replacement fill valve and have a few tools on hand; otherwise, the process is straightforward. This article will provide step-by-step instructions for replacing a toilet fill valve.

     

    Step 4: turn on the water and test the new fill valve.

    Once the new fill valve is in place, it’s time to turn the water back on and test the new valve. First, open the shut-off valve so water can flow freely into the tank. Then, flush the toilet to see if the new valve works correctly. The tank should fill up with water and stop once it reaches a certain level. If everything looks good, then you’re all done!

Angle Valve Spare parts:

wash machine angle valve
Toilet stop valve

Spare parts of a product are copies to replace the original damaged parts. If your angle valve gas has any problem, you can change that part instead of replacing the whole valve. Angle valves spare parts are easy to access and cost less than a new valve.

 

We will discuss the most critical angle valve spare parts to replace with a new piece.

 

Seal kits:

 

A seal kit is a physical object that contains lip seals and sealing rings to use as a spare part of a mechanical device. They are an essential part of angle valves as they protect against leakages in hydraulic fluid movement. Most commonly, companies use some soft material in manufacturing seal kits. It makes them fit well in their place to fill out any space.

 

They play a crucial role in the successful working of an angle valve. There must be no space to leak water for fluid separation and blockade. It can be damaging at times. Especially during a repairing time when fluid loss can redirect the process.

 

Seal kits offer a variety of benefits and marks among the essential angle valve spare parts. The material they contain as a core ingredient can bear high-pressure conditions. It means it endures a significant pressure range without breaking itself.

 

Secondly, the product is malleable and nonmetallic. It ensures a much longer life span as the pressure on metals can cause difficulty. But, this material is not easily affected by the all-time water presence as it is more durable.

 

Hence, seal kits are crucial to angle valve spare parts.

 

Reed Sensors:

 

Reed sensors are indicators that explain the opening or closing of a valve. We use them In electro-pneumatic angle valves. Now, this marks a great significance. Most of the time, it gets hard to recognize the position of an angle valve. Reed sensors reduce this concern. They state a specific LED (primarily red) that shows whether the valve is open or closed.

 

Reed Sensors also says the position or flow of the products inside the pipelines. It is an impressive innovation that brings a lot of ease. They are a result of advancements in technology.

 

The advantages of reed sensors make them stand among the best angle valve spare parts. We know that Large pipelines and drain systems can be hard to check manually. It consumes excessive energy and time with extra cost for workers in industrial use. An automated indicator system speaks up for any problem inside the pipelines.

 

Reed sensors have made it easier to do in seconds. You can find out The passage covered by the funds, direction, and motion with the help of reed sensors.

 

wash machine angle valve
brass toilet valve

3 Way Brass Stop Angle Valve

 

 

Bellows:

 

It is one of the angle valve spare parts we use for gate and globe angle valves. It is because of their structural correlation with these angle valve shapes.

 

This part aims to hold the valve stem so that no leakage occurs. It uses a metal bellow in a cylindrical shape that fixes well to the base of the valve.

 

Bellows behave like diaphragm in a vertical position. One ends with the valve top, while the other associates with the bottom. It allows a little space to move the valve that pushes it. It determines the opening or closing of angle valves.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC, and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting,adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Plumberstar valve is mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

At Plumberstar, we boast 15 years of expertise in water and gas projects, and long-term partnerships with top global clients.

We offer competitive pricing and tailored solutions, thanks to our high order volumes and provide flexible solution

Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Plumberstar Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing
stainless steel insert and adapter and copper rings. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of Lead-Free DZR brass for a durable fitting that is also corrosion resistant
quality and performance is field-proven with more than 350 customers.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. Custom-Made and samples are free.

MOQ and Delivery – Lower MOQ even reach 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production, OEM, and ODM both available.

Non Disclosure Agreement – Plumberstar will not provide the same valves and manifold to your competitors. and help you to get more market shares, then we can sign an exclusive agreement

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order, free replacement if any is damaged, updated hot-sales items recommendations

Radiator works with a man

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchasing with competitive cost of valves and sanitary ware items. You get better prices for winning more in markets

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

There are many reasons to choose brass valves over other types of valves. Brass is a highly durable material that can withstand high temperatures and pressure. It is also resistant to corrosion, making it an ideal choice for use in wet environments. Brass valves are also easy to clean and maintain, which is an important consideration for busy households. Plumberstar brass valves are some of the most reliable and durable on the market. Plumberstar valves are easy to install and come with clear instructions.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?