Bronze Swing Check Valve

Parameters of Bronze Swing Check Valve

Swing Check Valves can be installed in horizontal or vertical upward flow pipe systems.

Additional information

Materials:

Bronze, Lead-free brass

Finising:

Original, Sand blasted

Size:

1/2"-2"

Temperature:

-15˚C-115˚C

Thread connection

BSP, NPT

Working pressure

200PSI

MOQ:

100pcs

Warranty:

24 months

Details about Bronze Swing Check Valve

Bronze Horizontal Swing Check Valve

JX-0612

  • Nominal Pressure: 2.0MPa
  • Working Medium: Water, Non-corrosive liquid
  • Working Temperature: -20℃≤t≤150℃
  • Thread to ISO228
  • Note: Sealing Material is Brass
  • Swing check valve size: 1/2-2 inch BSP female x female threaded.
  • Swing check valve material: Brass.
  • Max pressure: 200 Psi.
  • Wide application: Applicable for water, steam, oils, nitric acid, urea, and more. They are mainly used in petroleum, chemical, pharmacy, fertilizer, and electricity pipelines.
  • Good sealing: The lifting and closing parts are opened or closed by the medium flow and the force, and the sealing property is suitable to prevent liquid leakage. This type of valve should be installed horizontally, allowing only the medium to flow in one direction to avoid accidents.
bronze check valve drawing
bronze check valve drawing

 

bronze swing check valve
bronze swing check valve

Swing Check Valves are used for water and other liquids. Swing Check Valves can be installed in horizontal or vertical upward flow pipe systems. The valve should be fitted with a rubber-faced seal for low-pressure applications and air or gas systems where bubble-tight closure is necessary. The current range does not include this facility, but such a feature can be available for special orders. Applications and uses Check Valve range are available with water, oil, and air up to 20 bar.

A brass swing check valve, also known as a ballcock, is vital for plumbing systems. It is used to prevent the backflow of water and the buildup of pressure in the system. A brass swing check valve can leak or burst if installed correctly or maintained regularly. There are some other things you should know about this device before installing one!

-A brass swing check valve is available in many different sizes. Be sure to choose the right size for your system!

-The valves are also available in either threaded or flanged ends. Choose the type that will fit best with your plumbing system.

-A brass swing check valve should be installed so that water flow always goes in the same direction. This will help to prevent leaks and bursts.

-Be sure to keep the valve clean and free of debris buildup. This can cause the valve to leak or burst.

-If you notice that your brass swing check valve is leaking, it may need to be repaired or replaced. Contact a professional plumber if you have any questions or concerns.

What is a Bronze Swing Check Valve?

A bronze swing check valve is used for flow control in fluid systems. Commonly used in plumbing and industrial applications, the device consists of a disc with a hinge that allows it to open and close. When pressure increases on one side of the valve, it opens to release the excess. When the pressure returns to normal, the disc swings closed again, keeping any backflow from occurring.

A bronze swing check valve is an economical choice for most applications due to its durability and corrosion-resistance qualities. It can be used with many different fluids, including water, oil, and steam. This versatility makes it suitable for various industries, such as chemical processing plants, food processing facilities, and power plants. Additionally, some models may have additional features like non-return valves or filters, which can increase performance even further.

Advantages: Benefits of Using a Bronze Swing Check Valve

Bronze swing check valves are a popular choice among homeowners and business owners alike as they are an efficient way to regulate the flow of liquids and gases. The bronze material in these valves is exceptionally resistant to corrosion, making it an ideal choice for areas with salt water or other corrosive elements. Furthermore, this type of valve offers several advantages that make it the perfect option for any project requiring precise control over liquid or gas flow.

The first advantage of using a bronze swing check valve is that it can offer superior control over liquid or gas flow. This makes them ideal for applications requiring precise regulation, such as industrial processes, fire sprinkler systems, and even plumbing fixtures. Additionally, the fact that these valves can be installed horizontally or vertically, depending on their position, makes them incredibly versatile.

Applications: Where to Use a Bronze Swing Check Valve

Bronze swing check valves are an essential component in many applications. These valves help to control and regulate the flow of liquids, gases, or steam, and they’re commonly used in large-scale industrial applications. Here’s a look at some of the most common uses for bronze swing check valves.

One application where bronze swing check valves are used is in water treatment systems. The valve helps to prevent backflow and drinking water contamination by controlling the flow’s direction. It can also be used in irrigation systems to ensure that pumps don’t become overwhelmed with too much pressure from over-pressurized areas upstream. In addition, it can be installed on fire protection systems to protect against backflow when water pressure fluctuates too drastically.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar, founded in 2006, offers high-quality, customizable residential valves and pipe fittings for plumbing and heating systems, including metal valves, brass products, bibcocks, and stainless steel accessories.
Woman's hand closes the valve. Saving Water Consumption Concept
 

Plumberstar offers brass and stainless steel 304 valves, as well as HPVC and cast iron plumbing parts. Available in sizes ranging from 1/4 inch to 4 inches with BSP(G) and NPT threads. Products include shut-off needle valves, heating floor manifolds with 1-inch gauges and flowmeters, brass nipples, elbows, extensions, compression fittings, and adapters. Custom manufacturing plumbing products is also available.

How to benefit You

Plumberstar delivers reliable, high-quality plumbing solutions with competitive pricing, extensive customization, and free pressure testing. Our ISO 9001 certified products ensure safety, efficiency, and durability, meeting international standards for residential and commercial needs.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 18 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Choose Plumberstar for exceptional, customizable plumbing products with over 18+ years of experience. We guarantee competitive pricing, strict quality control, ISO 9001 certification, and dependable global delivery to ensure your projects meet top standards.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM