What is Modern Angle Valve?

In this blog post, you’ll read:An angle valve comprises an outer and inner port. These ports are at 90 degrees from one another. Yet, the angle valve comes in the classification of manual valves. This valve is generally applied to control or stop the liquid stream in a line.
Table of Contents

An angle valve comprises an outer and inner port. These ports are at 90 degrees from one another. Yet, the angle valve comes in the classification of manual valves. This valve is generally applied to control or stop the liquid stream in a line. Yet, it’s known as a stop valve. Stop valves are the valves that prevent the stream of liquid inside the tube. Nonetheless, angle valves are used as an industry and residential plumbing maintenance gadget.

An angle valve is a worked valve with its outlet opening fixed at a right angle to its inner area. Yet, it applies to maintaining a liquid’s stream in a line. It is a valve for controlling the stream of air or fluid. The liquid leaves at the proper position to the method where it enters the valve.

3 way valve
Two way angle stop valve

Parts and Angle Valve

Here are the main parts of the angle valve. Each part plays a major role in the working of this valve.

  • Bonnet
  • Stem
  • 0-ring
  • Piston
  • Body

 Technical Information

Size 3/8 inches, ¾ inches, ½ inches
Thread Connection NPT, BSPT, BSP
Working Pressure 12 bar
Temperature -10 ˚C-100˚C

Checks Before Changing Angle Valve

There are some exciting points before you choose to supplant an angle valve. First, figure out what kind of plumbing you have and what type of valve you need. If you’re not proficient or fine with soldering, you could use a handyman’s guide to complete the work. Check for spills after fixing another valve to ensure everything is safe.

While changing the valve, carry a bucket to catch any remaining water from the line after removing the old valve. To conclude, which decision is best for you? Yet, consider the expenses of changing the valve yourself instead of employing a handyperson.

Material Selection of Angle Valves

Copper is the best material for assembling angle valves. The reason is that it has excellent durability. It offers great support when contrasted with different metals. In contrast with copper, the zinc compound ages and has a more limited life service. Plastic or PVC has an aesthetic appearance and has a short life. The shine and luster of metal compounds give a good impression.

brass raw materials with a hole bar
Brass raw materials with a hole bar

Uses of Angle Valves

Angle valves are primarily used for two reasons:

  1. When renewing or updating the fixture or other installations is necessary. Rather than cutting the stream of water in the whole building or house, the angle valves can shut down the water. It is for only that one device or apparatus that should be fixed.
  2. At the stage of water spillage or even a whole burst, you can apply the angle stop to the stream. This flow stops at that apparatus or installation until the appropriate repairs are built.

How Do You Replace an Angle Valve?

Switch off the water that links with the angle valve. Reduce the compression bolt while holding the angle valve set up with another wrench. When free, complete the process of releasing with your fingers. Yet, end angle valve and compression bolt.

Take the new compression bolts and slide them over the line. Afterward, slide it on the valve. Fix the compression bolt on the valve using your fingers. Then, at that point, fix it utilizing the wrench. Hold the valve set up with one twist and improve the compression bolt by applying the other wrench. Try not to over-fix, as this might cause spillage.

Supplanting and finding out about an angle valve might be difficult, but it isn’t. A simple process that should be done within some time. If that anytime you feel that the venture is too intense, you can call a nearby handyman who might have the option to resolve your issue for you.

three way water valve (copy)
three-way water angle valve

How Do You Fix an Angle Valve?

This maintenance needs time to do it. Generally, around 1/2 of a day. Call your nearby handyman when you feel the project is too enormous to fix. They can help. For this task, you will require:

Stage One: Remove Your Old Angle Valve

Switch off the water and detach the water line from the angle valve afterward. Apply one wrench to keep the compression bolt. Yet, the other wrench is used to grasp the angle valve. Turn the wrench holding the compression bolt.

Stage Two: Replace the Supply Line

Utilize another supported line and change the angle valve.

Stage 3: Reattach the Line to the Valve

Eliminate the compression bolt from the valve. Yet, place the compression bolt over the nipple of the supply line. Fix the pressure sleeve to the valve utilizing the wrenches. Make sure to fix the compression bolt.

3 way valve (copy)
Angle stop valve

Features and Working of Angle Valves

An angle valve is used in various applications. It has multiple uses, from domestic purposes in the home to modern drives. The angle valve is an essential piece of many kinds of machinery. Yet, it handles different gases, chemicals, and liquids.

Angle valves have many sizes and designs. Yet, the degree of the undertaking and the elements of the channeling impact the size and plan. Higher and good-quality angle valves are generally proposed for heavy processes. It relies on the mechanical capabilities and materials utilized in valves. Each angle stop valve is intended to handle a particular amount of pressure.

A plug, stem, and seal are significant variables for selecting efficiency. The central capability of angle valves is to manage or control the stream and to reduce the tension. They may have a few effects on temperature.

The methods used to arrive at these capabilities can be unique. Best of all, angle valves can be used as

  • needle valve
  • stop check valve
  • check valve
  • shut-off valve

How Do You Connect Angle Valves?

Link the compression bolt over your line, then slide the valve onto the bar. Start fixing with your fingers, then, at that point, use two wrenches. One wrench will fix the compression bolt. The other wrench will hold the valve set up. While doing this, be sure not to over-fix the compression bolt to the valve since this will shred the nut. It might likewise make the valve spill.

How would it be a good idea for you to supplant shut-off valves?

You can expect a shut-off valve to go on for around 10 to 25 years, with a standard 20 years. However, if they are not “worked out” each little while, there is a great possibility a valve will freeze in the open position when you need it to close for a pipe repair or plumbing emergency.

What sort of valve is an angle valve?

Angle valves are also called triangular, angle, and angle water valves. This is because the line has a 90-degree corner shape at the angle valve, called an angle valve, an angle valve, and a chamfer water valve.

Three way water valve chrome
Three-way water valve chrome

When do you utilize an angle stop valve?

When an angle valve is utilized as a shut-off valve for plumbing pipe installations, it is called an angle stop valve or just an angle stop. There are two distinct valve components used in angle valves.

Where Must You Use Angle Valves in Home?

Usually, there are four points at home that need to apply the angle stop valves—cold water angle stop valve on lavatories water spout, wash basin. The washbowl on the fixture separately needs hot and cold angle stop valves.

The sump on the sink requires a hot and cold valve, and the water nozzle on the water spout needs two cold valves. Furthermore, when you are equipped with a water purifier, it requires a fixing angle valve for cold water.

angle valve spare parts
angle valve spare parts

What Are the Primary Advantages and Disadvantages of Angle Valves?


1) The stream path is too simple with self-cleaning performance. Yet, this applies to unclean media circumstances. It can enhance the anti-blocking angle valve.

2) It belongs to a single-valve seat with a small leakage.

3) It must be the angular connection.

4) The body of the valve is simple to forge rough. The high-pressure valve adopts the angle valve.

4) The small stream resistance, with the stream coefficient of the double seat valve, is more excellent than the single valve.

toilet stainless steel angle valve
Toilet stainless steel angle valve

Cons of Angle valve

It keeps the single-seat valve structure. Yet, the greater the channel, the smaller the suitable differential pressure.  


The angle valve plays a significant role in your plumbing framework. Yet, when it works correctly, it offers to turn off the water to a particular fixture or whole house. By this, you can keep your money by repairing the system.

Solutions For Waterworks Plumbing

Get quote Now

Free Sample with OEM

× How can I help you?