Description
1/2 and 3/4 inch MIP Connection, MHT Connection, Brass Plumbing Fitting
JX-0517
- Size 1/2″,3/4″
- Media; Water; Seawater
- Max pressure;16 bar
- Temperature;-10-110℃
- The hose garden valve is designed only for irrigation applications, not potable water.
- The exterior water fixture is constructed of heavy-duty brass with a brass handle for extra strength and durability.
- The outdoor water spigot is compatible with copper, galvanized pipe, standard garden hoses, and a 1/2-inch female hose thread connection.
- Connection; NPT 1/2 in and 3/4 in
- The irrigation garden hose valve allows easy installation and is usable for residential and commercial applications.
Tap Size | DN15-DN20 |
|---|---|
Work pressure | 1.2Mpa |
Bibcock Materials | Brass |
Tap Standards | BS2779,EN331,ISO228,DIN 259 |
Working Temperature: | From -20 ℃ To +80 ℃ |
Seat sealing | PTFE |
Handle Material: | Steel/copper |
Thread connection: | ISO228,BS2779,DIN 259, ASME B1.20 |
Quality/valve Certifications | cUpc, EN331 |
Finish; | Sandblasted, original |
Cartridge | Brass |
Introduction: what is a hose bibb?
A hose bibb is a valve that controls water flow from a hose. It is typically located near the end of a hose and has a threaded connection for attaching the hose to the bibb. The most common type of hose bibb is the gate valve, which has a handle that is turned to open or close the valve.
Hose bibbs are an essential part of any irrigation system. They are used to control the flow of water to your plants and can be adjusted to provide different amounts of water depending on the needs of your plants. Hose bibbs are typically brass or plastic and have various Connection types, including compression, soldered, threaded, and sweat. Hose bibbs are used to control the water flow to a hose. They usually have a handle that is turned to open or close the valve.
Types of hose bibbs
There are three hose bibbs: the standard, the frost-proof, and the anti-siphon.
The standard hose bibb is the most common type. It is easy to install and use. However, it is not as durable as the other two types.
The frost-proof hose bibb is more expensive than the standard, but it is worth the investment because it is much more durable. It is also less likely to freeze in cold weather.
The anti-siphon hose bibb is the most expensive, but it is the most effective at preventing water from being siphoned into your home’s water supply. The original purpose of the hose bibb was to water animals. Hose bibbs are designed to be used with a garden hose, but they can also be used to fill buckets or water cans for plants that need more water.
The benefits of a hose bibb with 1/2 and 3/4 inch MIP connection
A hose bibb with 1 2 and 3/ 4 inch MIP connection is a great addition to any home. It allows for easy connection of hoses to various appliances and fixtures. Additionally, it provides an extra layer of protection against backflow. This type of hose bibb is less likely to leak than those without a MIP connection.
How to install a hose bibb
A hose bibb is a spigot attached to the end of a water supply hose. It is used to control the flow of water from the hose. A hose bibb with a 1/2-inch MIP connection has a maximum flow rate of six gallons per minute, while a 3/4-inch MIP connection has a maximum flow rate of 12 gallons per minute. The fittings that fit over the hose bibb spigot are called hose bibbs. To install a hose bibb, follow these steps: 1. Confirm that the water supply is turned off to the hose bibb. 2. Â Turn off the water supply to the hose bibb. 3. Â Locate the shutoff valve for the hose bibb and turn it clockwise to open it slightly. 4. Remove the hose bibb cap. 5. Connect a garden hose to the end of the faucet and turn on the water supply to the hose bibb.
