Brass Diverter Stem and cartridge for Tub Showers

Parameters of Brass Diverter Stem and cartridge for Tub Showers

Diverter Stem and cartridge for Tub Showers: The ultimate in showering luxury. Our Diverter Stem and cartridge for Tub Showers provide a smooth, controlled water flow that pampers you with every shower.

Additional information





Thread connection





24 months



Details about Brass Diverter Stem and cartridge for Tub Showers

Brass Diverter Stem and cartridge for Tub Showers



OEM and custom are both available.

Replacement Diverter with Cap NPT Thread Gasket to Repair shower Imperial Three Valve Showers; Overall Height 2″-4-1/4″


Introduction: what is a brass diverter stem and cartridge?

If you have a leaky tub shower and are in need of a replacement diverter stem or cartridge, look no further than your local hardware store. Brass diverter stems and cartridges are available in various sizes to fit most tub showers. For an easy installation, be sure to take the old diverter stem or cartridge with you to the store so that you can find an exact match. The benefits of using a brass diverter stem and cartridge are that they are easy to install, inexpensive and available at most hardware stores. They can also be installed by just about any homeowner.


The different types of brass diverter stems and cartridges

There are many different types of brass diverter stems and cartridges on the market. The most common type is the single-handle diverter stem, which controls the water flow in a tub shower. This type of diverter stem has a knob that controls the water pressure and temperature. The cartridge is located inside the diverter stem and controls the water flow by opening and closing the valve. A single-handle diverter stem is easy to install. However, the handle occasionally becomes loose, which can cause leaks and make the water temperature fluctuate. A two-handle diverter stem is used on a tub/shower combination.

swivel elbow for shower accessories (copy)
Diverter Stem and cartridge for Tub Showers


Another type of brass diverter stem is the dual-handle diverter stem. This type of diverter stem has two knobs, one for controlling the water pressure and one for controlling the temperature. The cartridge is located inside the diverter stem and controls the water flow by opening and closing the valve. Brass diverter stem repairs are similar to diverter valve replacements. If you have a leaking brass diverter valve, you will need to replace the cartridge and possibly the packing nut.


The last type of brass diverter stem is the pressure-balance diverter stem.

A pressure-balance diverter stem is the last type of brass diverter stem. It is used to control the water pressure in a tub shower. The pressure-balance diverter stem is located at the top of the faucet and has a small knob that controls the water flow. The pressure-balance diverter stem is made of brass and has a chrome finish. A pressure-balance diverter stem is used to control the water pressure in a tub shower. The pressure-balance diverter stem is located at the top of the faucet and has a small knob that controls the water flow.


How to install a brass diverter stem and cartridge

To replace an old or damaged diverter stem in your tub shower, first, remove the old stem by unscrewing it from the valve. Next, apply Teflon tape to the threads of the new brass diverter stem before screwing it into the valve. To finish, install the new cartridge by aligning it with the splines on the valve body and turning it clockwise until it is tight. How to install a diverter valve stem and cartridge


Using the right type of valve stem when installing a new cartridge in your tub shower is important. To find out which type you need, look at your existing diverter valve.


How to troubleshoot common problems with brass diverter stems and cartridges

If you’re having trouble with your brass diverter stem or cartridge, there are a few things you can do to troubleshoot the problem. First, make sure that the diverter stem is properly installed. If it’s not, unscrew it and try screwing it back in again. If that doesn’t work, try replacing the washer on the diverter stem. If that doesn’t fix the problem, you may need to replace the entire diverter stem.


If the problem is with the cartridge, first ensure it’s properly seated in the housing. If it’s not, then remove it and try reinstalling it. If that doesn’t work, you may need to clean the housing and/or replace the O-rings on the cartridge. If the problem is with the flapper, first check to see if it’s stuck. If it is, then you may need to replace it. If not, try cleaning out the flapper seat and ensuring no obstructions in the drain.




water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC, and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting,adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Plumberstar valve is mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

At Plumberstar, we boast 15 years of expertise in water and gas projects, and long-term partnerships with top global clients.

We offer competitive pricing and tailored solutions, thanks to our high order volumes and provide flexible solution

Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Plumberstar Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing
stainless steel insert and adapter and copper rings. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of Lead-Free DZR brass for a durable fitting that is also corrosion resistant
quality and performance is field-proven with more than 350 customers.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. Custom-Made and samples are free.

MOQ and Delivery – Lower MOQ even reach 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production, OEM, and ODM both available.

Non Disclosure Agreement – Plumberstar will not provide the same valves and manifold to your competitors. and help you to get more market shares, then we can sign an exclusive agreement

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order, free replacement if any is damaged, updated hot-sales items recommendations

Radiator works with a man

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchasing with competitive cost of valves and sanitary ware items. You get better prices for winning more in markets

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

There are many reasons to choose brass valves over other types of valves. Brass is a highly durable material that can withstand high temperatures and pressure. It is also resistant to corrosion, making it an ideal choice for use in wet environments. Brass valves are also easy to clean and maintain, which is an important consideration for busy households. Plumberstar brass valves are some of the most reliable and durable on the market. Plumberstar valves are easy to install and come with clear instructions.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?