Pump Group Underfloor Heating Circuit Mixing Distributor

Parameters of Pump Group Underfloor Heating Circuit Mixing Distributor

The Manifold connects the heat source – a boiler, heat pump, or other – with the water underfloor heating circuits, regulates the incoming water temperature via the Mixing Unit and distributes this warm water throughout the floor circuits for an energy-efficient heating system.

Additional information

Materials:

Brass, CW617N

Size:

1"

Temperature:

0°C-90°C

Thread connection

BSP, NPT

Working pressure

10 bar

MOQ:

300pcs

Warranty:

24 months

Details about Pump Group Underfloor Heating Circuit Mixing Distributor

JX-0709

Pump Group Underfloor Heating Circuit Mixing Distributor

DN25/one inch
Processing custom
Working pressure;1.6 (MPa)
Cold water temperature;0(℃)
Hot water temperature;90(℃)
Outlet flow rate;1.7-4.1(m3/h)
Passing diameter;32(mm)
Scope of application; HVAC project
pump group underfloor heating circuit mixing distributor
pump group underfloor heating circuit mixing distributor

Pump Group

Size

DN25

Pressure

PN10 

Materials

Normal brass, Lead-free brass

Standards

BS2779,EN331,ISO228,DIN 259

Working Temperature:

From 0 ℃ To +90 ℃

Seat sealing Material:

PTFE, Rubber, Washer

Accessories

 Clamp, air vent valve, Gauge, Adapter

Thread connection:

NPT, BSPT, BSP, Custom

Quality/valve Certifications

CE,ISO9001,ACS

Finish;

Nickel-plated, Chrome plated

Cartridge

Brass cartridge

Manifold operator

Auto control, Actuator

Nickname

Pex Manifold 

O ring

NBR

Working temp.

1Mpa

The Pump Group Underfloor Heating Circuit Mixing Distributor is a component used in underfloor heating systems to regulate and distribute the flow of heated water. Here’s an overview of its applications, how it works, installation and repair, advantages, and a tutorial:

Applications: The pump group underfloor heating circuit mixing distributor is used in underfloor heating systems to regulate the water temperature used to heat the floor. It is often used in residential and commercial buildings and can be installed in new construction or retrofit projects.

How it works: The pump group underfloor heating circuit mixing distributor works by regulating the temperature of the water that flows through the underfloor heating system. The device includes a circulating pump, a temperature sensor, a mixing valve, and a manifold. The circulating pump pushes hot water through the manifold, distributing the hot water to the underfloor heating pipes. The temperature sensor measures the temperature of the water, and the mixing valve regulates the flow of hot and cold water to maintain the desired temperature.

Installation and repair: A qualified heating technician typically installs the pump group underfloor heating circuit mixing distributor. The device is usually mounted on a wall or installed on a frame, and the underfloor heating pipes are connected to the manifold. If the device needs to be repaired, a heating technician should be called to diagnose the problem and make the necessary repairs.

Advantages: The pump group underfloor heating circuit mixing distributor provides several advantages over traditional heating systems. It can help to reduce energy consumption by regulating the temperature of the water used to heat the floor. It can also improve the comfort level of a building by providing even heat distribution throughout the space. Additionally, underfloor heating systems are often more aesthetically pleasing since they do not require visible radiators or heating ducts.

Tutorial: If installing a pump group underfloor heating circuit mixing distributor, it’s important to follow the manufacturer’s instructions carefully. The device should be mounted in a location that is easily accessible for maintenance and repair. The underfloor heating pipes should be connected to the manifold in a way that allows for easy flow of the hot water.

If you need to repair the device, it’s important to turn off the power and water supply before attempting any repairs. You should also consult the manufacturer’s instructions or contact a qualified heating technician for guidance.

The water pump group underfloor heating circuit mixing distributor is a component used in underfloor heating systems to regulate the water temperature used to heat the floor. It is typically installed by a qualified heating technician and provides several advantages over traditional heating systems. If installing or repairing this device, it’s important to follow the manufacturer’s instructions and seek professional guidance.

To provide more information on the installation process, here are the steps to install a pump group underfloor heating circuit mixing distributor:

  1. Plan the layout of the underfloor heating system, ensuring that the manifold and pump group will be installed in a central location with access to the hot water supply and electricity.
  2. Install the manifold in the chosen location and connect the underfloor heating pipes to the manifold using compression fittings. Make sure that the pipes are laid out according to the heating system plan.
  3. Mount the pump group on the wall adjacent to the manifold, ensuring it is level and securely attached.
  4. Connect the hot water supply to the pump group’s inlet and the pump group’s outlet to the manifold.
  5. Connect the power supply to the pump group and ensure that the pump is working properly.
  6. Install the temperature sensor on the manifold, ensuring it is securely attached and connected to the mixing valve.
  7. Install the mixing valve and connect it to the temperature sensor and the cold water supply. Adjust the valve to the desired temperature range.
  8. Fill the underfloor heating system with water and bleed the air out.
  9. Test the system to ensure that the water flows through the system properly and the mixing valve regulates the temperature.

To ensure that the pump group underfloor heating circuit mixing distributor functions properly and efficiently, a qualified heating technician must have it serviced regularly. Routine maintenance can help prevent leaks, airlocks, and pump failure. It’s also important to follow the manufacturer’s instructions and use compatible components when installing or repairing the system.

It helps regulate the temperature of the water used to heat the floor and provides several advantages over traditional heating systems. With proper installation, maintenance, and repair, the pump group can help ensure efficient and effective heating for a wide range of residential and commercial buildings.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?