Floor Heating Mixed Water Center For Water Temperature Control System

Parameters of Floor Heating Mixed Water Center For Water Temperature Control System

The Manifold connects the heat source – a boiler, heat pump, or other – with the water underfloor heating circuits, regulates the incoming water temperature via the Mixing Unit and distributes this warm water throughout the floor circuits for an energy-efficient heating system.

Additional information

Materials:

Brass, CW617N

Size:

1"

Temperature:

0°C-90°C

Thread connection

BSP, NPT

Working pressure

10 bar

MOQ:

300pcs

Warranty:

24 months

Details about Floor Heating Mixed Water Center For Water Temperature Control System

JX-0710

Floor Heating Mixed Water Center For Water Temperature Control System

DN25
Valve standard; National Standard
The object of action; Floor heating mixing system
Applicable media; water
Dimension; Medium size
Structure form; Fixed type
Pressure environment; Atmospheric pressure
Driving method; Electronic
Flow direction; Commutation
Valve role; Floor heating mixing system
Mode of action; Single action
Type (channel position); Four-way flow channel
Eccentricity requirement; No eccentricity
Functional role; Bypass type
Lining material; Rubber
Water pump: silent water pump
Voltage: 230V Frequency: 50Hz
Flow 1.9m3 / h Head: 3.1m
Selection of refined copper material: The valve body is cast after high-temperature forging to ensure that it is high-density, safe, and reliable. It’s suitable for home heating.

Pump Group

Size

DN25

Pressure

PN10 

Materials

CW617N, brass, Lead-free brass

Standards

BS2779,EN331,ISO228,DIN 259

Working Temperature:

From 0 ℃ To +90 ℃

Seat sealing Material:

PTFE, Rubber, Washer

Accessories

 Clamp, air vent valve, Gauge, Adapter

Thread connection:

NPT, BSPT, BSP, Custom

Quality/valve Certifications

CE,ISO9001,ACS

Finishing

Original brass

Cartridge

NO cartridge

Manifold operator

Auto control, Actuator, Handwheel

Nickname

Water heating pump center

O ring

NBR

Working temp.

1.0Mpa

A floor-heating mixed water center is a device that controls the temperature of the water that is circulated through a floor-heating system. This device mixes hot water from a boiler with cooler water from a return pipe to achieve the desired temperature. The mixed water is then distributed to the floor heating system. Here’s a step-by-step tutorial on how to install a floor-heating mixed water center for a water temperature control system:

  1. Gather the necessary tools and materials. You will need a floor heating mixed water center, a boiler, a return pipe, a supply pipe, and various plumbing tools and accessories.
  2. Determine the location of the mixed water center. The center should be installed in a location that is easily accessible and close to the boiler and floor heating system.
  3. Install the mixed water center. The center should be installed on a sturdy surface, such as a concrete slab, and secured with bolts or screws. Connect the supply pipe and return the pipe to the mixed water center.
  4. Connect the mixed water center to the boiler. Use a pipe wrench to connect the hot water outlet from the boiler to the mixed water center.
  5. Connect the mixed water center to the floor heating system. Use a pipe wrench to connect the mixed water outlet to the distribution manifold for the floor heating system.
  6. Test the system. Turn on the boiler and allow it to heat up. Use a thermometer to check the mixed water temperature at the outlet of the mixed water center. Adjust the temperature using the mixing valve until the desired temperature is reached.

Floor Heating Mixed Water Center for Water Temperature Control System Applications:

Floor-heating mixed water centers are commonly used in residential and commercial buildings to control water temperature in floor heating systems. These systems provide an efficient and comfortable way to heat a building. The mixed water center can also control water temperature in other hydronic heating systems, such as radiators or baseboard heaters.

How the Floor Heating Mixed Water Center for Water Temperature Control System Works:

The floor heating mixed water center works by mixing hot water from a boiler with cooler water from a return pipe. The mixing valve in the center controls the temperature of the mixed water that is then distributed to the floor heating system. The temperature is adjusted by opening or closing the mixing valve to allow more or less hot water to flow into the mixing chamber.

Floor Heating Mixed Water Center for Water Temperature Control System Installation Tips:

  • Make sure to use the correct size pipes and fittings for your system.
  • Follow the manufacturer’s instructions for installation and use.
  • Install the mixed water center in a location that is easily accessible for maintenance and repair.

Repair Tips:

  • If the mixed water temperature is not reaching the desired temperature, check the mixing valve and adjust it as needed.
  • Check for leaks in the pipes and fittings and repair them as needed.
  • Check the boiler and floor heating system for any issues affecting the performance of the mixed water center.
  • If the mixed water temperature is too high, it may be due to a malfunctioning temperature sensor or a faulty mixing valve. Check these components and replace them if necessary.
  • If the mixed water temperature is too low, check the hot water supply from the boiler and ensure that the boiler is functioning properly.
  • If the mixed water center is not operating, check the power supply and ensure that the control panel is functioning properly. Check the fuses and circuit breakers as well.

It’s important to perform regular maintenance on the floor heating mixed water center to ensure its continued operation. This includes cleaning the mixing valve and sensors, checking for leaks, and inspecting the pipes and fittings for any signs of wear or damage.

In summary, a floor-heating mixed water center for water temperature control is essential to a hydronic heating system. Proper installation, use, and maintenance can provide efficient and comfortable heating for a building. If you encounter any issues with your mixed water center, it’s important to address them promptly to prevent further damage and ensure that your system continues to operate effectively.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?