Temperature Pressure Relief Valve

Temperature Pressure Relief Valve

The water pressure relief valve can withstand a pressure of 1.6 MPa and can be installed in front of most tap water equipment to regulate water pressure.

Materials:

C37700, H58-3, Lead-free brass

Finising:

Sand blasted

Size:

1/2", 3/4"

Thread connection

BSP, NPT

Working pressure

16 bar

MOQ:

1000pcs

Lead time:

45 days

Warranty:

36 months

Temperature Pressure Relief Valve

JX-0911

  • ASME-Code Fast-Acting Pressure-Relief Valves for Low-Pressure Steam
  • For Use With Steam
  • ASME Code IV for Low-Pressure Steam
  • Temperature: 110° F
  • These valves meet ASME Code Section IV for low-pressure steam-heating boilers requiring pressure relief at 15 psi.
  • All springs fully open at the set pressure and remain open until the system pressure is restored below the set pressure.
  • The body is bronze for durability and long service life.
  • Vented relief ports exhaust directly.

Threaded relief ports can be attached to a drain line for remote discharge

  • The pressure-reducing valve adopts a piston structure, and the internal system is simple. The nut can be rotated through the movable joint, and only the sealing gasket can be placed to complete the installation.
  • This water pressure-reducing valve does not require a bypass pipe, and the distribution pipe is simple, saving a lot of space and distribution costs.
  • The water pressure relief valve has a pressure adjustment knob inside the top cover, adjusted freely. It is equipped with a pressure gauge for easy viewing of pressure.
  • The water pressure relief valve can withstand a pressure of 1.6 MPa and can be installed in front of most tap water equipment to regulate water pressure.
  • We strive to provide you with the highest quality product and customer experience. If you’re not entirely satisfied, please get in touch with us at any time.

If you’ve ever seen a movie where a pipe bursts and floods the entire room, then you know how important it is to prevent pipes from bursting. A temperature-pressure relief valve is essential to any plumbing system that could help prevent this catastrophe. Here are some questions to ask yourself before deciding on a new one:

A) What type of piping do I use?

B) How many fixtures can my current valve handle?

C) Do I need a duplex or single-acting relief valve?

D) What should I do if my relief valve starts leaking?

E) Is there a way to test my current temperature-pressure relief valve?

You will see that most of the answers are related to your plumbing system and how it’s set up. This information is essential for you to decide when choosing a new one. Temperature Pressure Relief Valve. Here are some questions to ask yourself before deciding on a new one: A) You first need to know what type of piping your home has, copper or PVC pipes. If you have copper pipe, it doesn’t require any particular parts when purchasing this kind of valve. Still, with plastic piping (PVC), you will need to buy a valve with the appropriate threaded fittings depending on the diameter and size of the piping. B) How many fixtures are attached to your relief valve? Most valves are rated at 150 PSI, but if you have more than one fixture, it’s best to upgrade to a higher-pressure-rated valve. C) Do you want a duplex or single-acting relief valve? A duplex is two independent valves in one body, while a single-acting valve only opens when pressure increases on one side. D) Another vital question is, what do I do if my relief valve leaks? If this happens, don’t panic! Shut off the water supply and call a professional plumber. E) Last, but not least, you should always test your current valve to see if it’s still working. One way of doing this is using a garden hose to mimic the increase in water pressure. Place the open end of the hose on top of the discharge pipe and turn on the faucet at full blast. If the valve opens, then it’s still functioning properly.

If you’re experiencing a water tank leak, our relief valve can help! This product is designed to work with water tanks and help quickly stop leaks. Made of durable materials, our relief valve is essential to have on hand in an emergency.

OrthoLite X25 high-performance orthotic insoles for men are formulated with higher rebound and customized elasticity to provide a comfortable fit for your application. The ideal foam shoe inserts for footwear used in high-impact sporting activities, OrthoLite X25, are also the right foot support choice for your minimalist footwear. Khombu uses high levels of cushioning in micro-thin layers of foam, making the OrthoLite insole an excellent fit for your dress shoes, too!

FAQs

1. What is the temperature relief setting of the temperature-pressure relief valve?

This temperature-pressure relief valve triggers at a set temperature of 210℉ (99℃). Once the water hits this value, the internal temperature sensing part kicks in and opens the valve automatically to release pressure and drain hot water. This stops the water heater from overheating and bursting. We also make models with custom trigger temperatures. 160℉ and 180℉ are available choices for small storage tanks or special heating equipment.

2. What material is the temperature-pressure relief valve’s internal spring made from?

The temperature-pressure relief valve uses 316 stainless steel as the standard material for its internal spring. This material holds up well against hot water corrosion. It will not easily rust or lose spring tension after prolonged exposure to the high-temperature environment inside water heaters, and it maintains the preset opening pressure for continuous high-temperature operation in storage water heaters.

We supply upgraded Hastelloy C springs as a custom choice for coastal locations with high salt content in the water supply. This material offers much better protection against chloride corrosion and reduces the risk of the spring sticking or pressure values shifting.

We run sample checks of spring load properties during production, in accordance with the approved inspection plan. Finished valves also undergo set-pressure and related performance tests to confirm proper operation. We can hand over matching material certificates based on the actual materials used for your order.

3. Can you preset the T&P relief valve safety limit to our requirements?

Temperature Pressure Relief Valve
Temperature Pressure Relief Valve

Yes, we can pre-configure your TPR valve safety limits to fit your project requirements. Temperature and pressure set points get calibrated individually. Our standard factory settings are 210℉ for temperature and 150psi for pressure. You can change just the temperature threshold, or adjust the pressure setting at the same time; these two values are calibrated independently of one another.

Available preset choices cover temperature options of 160℉ and 180℉. Pressure settings can be set to 75 psi, 100 psi, or 125 psi to meet your requirements. Every valve goes through pop testing on our test bench during production. This check makes sure each valve’s trigger value lands inside the permitted ±3% tolerance range.

4. What is the lead time for a standard temperature-pressure relief valve order?

Plumberstar standard temperature-pressure relief valves take 45 days to make after we confirm your order and get your deposit. This time includes cutting the valve body, putting springs together, adjusting the thermal sensor, and running water pressure and temperature pop tests on every valve. We take samples from each batch for cyclic aging tests, and we save all inspection records sorted by batch number. Once all checks pass, we can load the container, and this works for both LCL partial shipments and full container orders. We will double-check the final delivery time for each order after we get your official PO and prepayment.

5. How long does the temperature pressure-relief valve’s probe extend?

The temperature sensing probe for the temperature-pressure relief valve has a standard effective immersion length of 3 inches. This measurement runs from the valve body’s sealing bottom surface all the way to the very tip of the probe. This part has to sit inside the water heater’s water to read the temperature correctly. You need to tell the threaded section apart from the effective immersion part during installation, and a wrong fitting will lead to inaccurate temperature readings.

We can make custom effective immersion lengths of 2, 4, 5, and 6 inches. These options work for small tanks or large vertical water heaters with a big capacity. Every finished probe is tested for trigger temperature on a constant-temperature bench. This keeps the trigger error within ±3℉. The probe base uses oxygen-free copper with a white inert coating for thermal sensing. It transfers heat quickly and stands up to corrosion from hot water. Changing the probe length will not slow down its temperature response.

Materials:

C37700, H58-3, Lead-free brass

Finising:

Sand blasted

Size:

1/2", 3/4"

Thread connection

BSP, NPT

Working pressure

16 bar

MOQ:

1000pcs

Lead time:

45 days

Warranty:

36 months

Scroll to Top

Get Quote Now

Free Sample with OEM