Water Distribution Manifolds

Parameters of Water Distribution Manifolds

The Manifold connects the heat source – a boiler, heat pump, or other – with the water underfloor heating circuits, regulates the incoming water temperature via the Mixing Unit and distributes this warm water throughout the floor circuits for an energy-efficient heating system.

Additional information

Materials:

Stainless steel

Size:

1"

Temperature:

-20˚C-110˚C

Thread connection

BSP, NPT

Working pressure

16 bar

Loops:

2-12

MOQ:

100pcs

Warranty:

12 months

Details about Water Distribution Manifolds

Water Distribution Heating Manifolds

JX-0703

  • Stainless steel Manifold
  • Stainless steel 304
  • Polishing surface treatment
  • Operating temperature;-10-110℃
  • Working pressure; Max 16 bar
  • Connection thread; 3/4″&1/2″ loop
  • Hard sealing with a flexible fitting connection.
  • Manufactured from corrosion-resistant and durable Stainless Steel to last for life
  • Compatible with any PEX tubing – no special adapters needed
  • Mount the Manifold on brackets and connect the valves and PEX tubing
  • The Manifold connects the heat source – a boiler, heat pump, or other – with the water underfloor heating circuits, regulates the incoming water temperature via the Mixing Unit and distributes this warm water throughout the floor circuits’ energy-efficient heating system.
  • Manifolds are used in all underfloor heating systems above 25m2, irrespective of floor type. Manifolds are supplied complete and fixed with a wall mounting bracket. The Manifold comes complete with a drain and air vent assembly positioned on either end of the Manifold. The isolation valves are supplied separately for the supply end of the Manifold.

Heating manifold

Manifold

1″

Manifold pressure

PN20

Manifold Materials

Normal brass, Lead-free brass, stainless steel

Manifold Port

2-12 loops

Working Temperature:

From 5 ℃ To +110 ℃

Seat sealing Material:

PTFE

Accessories

Flow meter, manifold clamp, air vent valve, pressure gauge

Thread connection:

ISO228,BS2779,DIN 259, ASME B1.20.-1983 Pipe Thread

Quality Certifications

CE,ISO9001,ACS

Finish;

Original

Cartridge

Brass cartridge

Manifold operator

Handwheel, Worm Gear, Electric actuator

Nickname

Manifold heating

O ring

NBR

Adapter

3/4″x20; 3/4″x16
  • How Heating Manifold Works: Underfloor heating systems comprise pipework installed. This happens within custom underfloor heating insulation panels. The pipework can be applied in various ways forming circuits. A single circuit could be for a single room or area. Many circuits could be far more significant or open areas. Each floor circuit connects to a central Manifold which allows independent control. Manifolds can control more than one circuit concurrently. It can warm different rooms to different temperatures. It can warm by using a zone-specific thermostat also. The Manifold connects the heat source with a boiler. It also connects the heat pump with the water underfloor heating circuits. It adjusts the incoming water temperature via the Mixing Unit. It also allocates warm water throughout the floor circuits. It helps with energy-efficient heating. The underfloor heating circuits are filled and purged with water. It’s because of successful installation & pipework connections. A primary heating circuit makes a connection with a heat source. Sometimes heat sources can provide the essential water temperature without overheating. There is no need to use a mixing unit at that time. The Mixing Unit adjusts the water temperature through an Actuator-controlled Mixing Valve. It also composites the heated water from the primary heating circuit. It happens because of cooler water. It occurs within the floor circuits to achieve the ideal temperature. You can configure this temperature during the installation procedure. It’ll match the designed heat requirements. Heat losses, floor construction, and any other variables determine the requirements.Underfloor circuits maintain the heated water’s flow pressure. Manifolds can support up to 120 Meters of underfloor heating pipes for one circuit. The flow rates for individual circuits are set via the Flow Gauges. It suits the specific circuit’s needs before the water goes through these pipes. The correct configuration ensures that heated zones will heat the space. Corrected setup of flow pressure and flow rates will make an accessible path of transportation. The heated water can be transported from the Manifold into the floor. Manifold’s Flow Arm can occur spontaneously. After circulating the floor circuits, the water re-enters the Heating Manifold. The Return Arm consists of Circuit Valves that are commonly mounted with Actuators. These are being opened and closed as instructed by the Thermostat via the Wiring Centre.

    Wiring Centre is a combination of all electrical components. This forges a connection between the Thermostat and the heat source. It is involved with Manifold’s Actuators, Circulators, and any Valves. The actuator works to open the Commissioning Valves. It allows warm water to flow through the circuits. The Wiring Centre also controls the boiler for more heat. It opens any Manifold zone valves. So, finally, it is easy to operate the Mixing Unit Circulator. A Smart Thermostat can control the floor heating. It ensures energy-efficient heating with long-term cost savings. So It can affect your heating bills.

    There are a few factors for the location choices of the Heating Manifold. The piping layout is the first consideration of all. The Heating Manifold should always be set up in a location that will reduce the amount of tubing. The manifolds should be accessible because they have valves on them. Closing a manifold in a wall or any support is a worse idea. Reasonable access to a manifold should always be available. Long-time access might not be needed.

 

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?