Toilet Closet&Urinal Spud

Parameters of Toilet Closet&Urinal Spud

A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube.

Additional information

Materials:

C37700, H58-3, Lead-free brass

Finising:

Sand blasted

Temperature:

-10˚C-120˚C

Thread connection

BSP, NPT

Size:

1-1/2", 1-1/4', 1", 2", 3/4"

MOQ:

3000pcs

Warranty:

24 months

Details about Toilet Closet&Urinal Spud

Brass Closet Spud

JX-0805

 

#1 BRASS SPUD COMPLETE (1-1/4′ X 1-1/4′)
#2 BRASS SPUD COMPLETE (1-1/2′ X 1-1/2′)
#3 BRASS SPUD COMPLETE (2′ X 2′)
#4 BRASSCLOSET SPUD COMPLETE (1’X3/4′)
#5 BRASS SPUD COMPLETE (1-1/4′ X 3/4′)
#7 BRASS SPUD COMPLETE (1-1/2′ X 1-1/4′)
#8 BRASS SPUD COMPLETE (2′ X 1-1/4′)
#9 BRASS SPUD COMPLETE (2′ X 1-1/2′)
#9 BRASS SPUD COMPLETE (1-1/2 “X3/4″‘)
  • It has a forging&cast brass body, perfect for commercial applications
  • This closet spud includes a brass locknut, rubber, and metal washers
  •  It comes complete with all the necessary parts, which makes installation quick and easy
  • All are brass bodies; each spud has a rubber washer, friction ring, and brass locknut. Depending on how the spud is used, the threaded side connects a flushometer to the toilet fixture or from the tank piping into the bowl (wall-hung toilets).

A closet spud washer is a round, cylindrical gasket with a beveled edge and a flat edge on the other. It is about the size of a tiny teacup.

What is a Brass Closet Spud?

A brass closet spud in the bathroom is a metal pipe installed to regulate water pressure and easy installation of pipes. They’re generally found near bathtubs, showers, and sinks. These spuds aim to prevent over-pressurization from occurring within the plumbing system.

What Does a Brass Closet Spud in the Bathroom Do? A brass closet spud in the bathroom regulates water pressure and prevents over-pressurization within the plumbing system. If your home doesn’t have one installed, you may experience water flow and pressure problems. This can be especially true if more than one fixture or appliance is trying to use water simultaneously.

Why Is It Important to Have a Brass Closet Spud?

Without a brass closet spud in your bathroom, you may experience water flow and pressure problems. This can be especially true if more than one fixture or appliance is trying to use water simultaneously. In this situation, your institutions must have enough space for adequate drainage to prevent the overflowing of drains and tubs.

How Can You Install a Brass Closet Spud in the Bathroom?

Installing a brass closet spud in your bathroom is relatively easy. First, determine where you’d like to place it before purchasing it from your local hardware store. After buying one, ensure all pipes are turned off leading into said location to avoid getting damaged during installation. Once your pipes are turned off, you’ll need a wrench and plumber’s tape.

-First, tighten the brass closet spud into place using a wrench on both sides of the pipe. -Make sure that it is secure enough not to move but be careful not to over-tighten, or else you might strip out the threads making it difficult for them later down the line if they do come loose. -Next, wrap plumber tape around any threaded connections for added protection against future leaks (if there were no threading before installation). Use this method with sealing putty, which can help keep water from seeping through between joints once everything has dried completely, ensuring long-lasting sealant against all odds! Turn your water back on and test it out by running some water through the system at all your fixtures.

-To install a brass closet spud in a bathroom without over-pressurization risks:

-turn off all pipes leading into the installation site before beginning;

-use the wrench to tighten the brass closet spud into place on both sides of the pipe;

-wrap plumbers tape around threaded

Brass Closet Spud

The Brass Closet Spud is a unique home decor piece that adds style and functionality to any space. It has an elegant, modern design that makes it perfect for any room or corner of the house. The Brass Closet Spud combines practicality with beauty, providing a great way to organize your closets or store items in style.

This spud is made from high-quality brass material, giving it a luxurious look and feel. Its lightweight design allows you to easily move it around while its sturdy construction ensures it can support heavy items without bending or breaking. The closet spud features adjustable shelves to customize the storage space according to your needs. Additionally, this piece comes with an optional cover so you can hide away unsightly clutter and keep your home looking neat and tidy at all times.

Overview of Uses

Brass closet spuds are common and helpful plumbing used in many applications. Their primary purpose is to act as an adapter between the water supply line and the flush valve, ensuring a tight seal and secure connection. Due to their versatility, brass closet spuds can be found in residential, commercial, and industrial settings.

These accessories come in several sizes and designs to fit virtually any valve or pipe diameter needed. Brass is also known for its robustness, making it an ideal material for long-term use. With their corrosion-resistant properties, brass closet spuds can withstand harsh elements like rainwater or extreme temperatures without affecting their performance.

Additionally, these components are widely accepted within the industry due to their reliability and affordability; they are much less expensive than other metals while offering superior quality assurance.

Benefits of Brass Closet Spud

The brass closet spud is an often overlooked component of any bathroom plumbing system, yet it is essential for connecting the water supply to the toilet. Not only does a quality brass spud provide proper connections and prevent leakage, but it can also offer several additional benefits.

For starters, brass is a strong and durable material. This means that your spud will not only last longer than other materials but also won’t corrode or rust over time. Furthermore, unlike plastic or chrome fixtures, brass doesn’t require regular maintenance and cleaning to keep its luster. Its smooth finish helps ensure that no dirt or grime builds up on the surface.

Along with increased durability and low-maintenance requirements, brass closet spuds are highly resistant to temperature fluctuations, making them ideal for both heated and unheated bathrooms.

Differences Between Metal & Plastic Brass closet spuds are a great way to ensure that your plumbing fixtures are securely connected to the waste lines. These reliable, easy-to-install pieces of hardware make it easier than ever to complete plumbing projects confidently. Whether a DIYer or a professional plumber, brass closet spuds are an essential tool in your arsenal.

Installation Tips

Installing a brass closet spud can be intimidating, but with the right tips and tricks, you can install it successfully. A brass closet spud is a round fitting that attaches to the bottom of a toilet tank and connects it to the water supply line. It provides an easy way to shut off the water supply if there are leaks or problems with the toilet. Here are some top tips for installing your brass closet spud:

First, ensure you have all your tools ready before beginning installation. Make sure you have adjustable wrenches, pliers, PVC primer, and glue. You should also ensure that you have purchased the correct spud size for your tank; these come in different sizes based on how they connect to the water supply line.

Maintenance & Care

Brass closet spuds are essential to any bathroom, providing the perfect way to install a sink or toilet. These brass fixtures are often found in older homes and can become dirty and corroded. Regular maintenance and care are key to ensuring that your brass closet spud looks its best for years to come.

To properly maintain a brass closet spud, dry the surface with a damp cloth every week. This will help remove dirt and grime buildup and prevent water spots from forming. If there is stubborn residue, make sure to use an oil-based cleaner that won’t damage the finish of the brass fixture. Then buff it with a soft cloth or chamois for shine.

For those hard-to-reach spots, you can use toothpaste or baking soda mixed with vinegar for extra cleaning power.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?