Electric Motor Valve actuator

Parameters of Electric Motor Valve actuator

It is suitable for HVAC and status control of the water system. The valve body is adopting the ISO228 standard platform, the actuator’s using a synchronous machine that drives the gears steady.

Additional information


Brass, CW617N


Sand blasted, Sand blasted and Nickel plated


1", 1/2", 3/4"

Thread connection




Action time


Drive Power

220VAC, 24VAC

Medium temperature

2 ℃ -95 ℃

Lead time:

30 days


24 months

Details about Electric Motor Valve actuator

Automatic 230v 24v AC Water Motorized Control Electric Motor Valve actuator


Automatic Valve Actuator 230v 24v AC, DC Water Motorized Control Electric Motor Valve actuator

motorized ball valve is suitable for HVAC and status control of the water system. The valve body adopts the ISO5211 standard platform; the actuators use a synchronous machine that drives the gears steadily.
The new product is to meet customers’ requirements with compact size, ample torque, simple operation, free maintenance, and convenient installation under different working conditions. In addition, the actuator is equipped with a manual handle to open or close the valve in case of a power cut or other emergency.

Driving mode
Electric/Manual, with Position indicator
PN Class; PN16
Valve characteristic;90°Rotary(ON-OFF Type)
Power supply; AC230V /24V AC/DC 24V/DC 12V
Protection grade; IP44
Torque;5 Nm
Running time;60-120 seconds
Shell material; ABS
Cable length;1.0 M x 4 wires.

electrical actuators
electrical actuators

DC 24V
With an electric auxiliary switching valve function
Power consumption; 6W, running time; 5-15 seconds
Maximum differential pressure; 1.0Mpa
Low noise, operation noise less than 40DB;
The ball valve and the actuator are threaded following the way, quick disassembly.
Suitable for water or ethylene glycol with a concentration of less than 60%
Fluid temperature 2-94 °C degrees, storage temperature -20-65 °C.
Working pressure PN 1.6Mpa
The valve body is brass
Three lines 2 control
High temperature resistant


The Motorized ball valve is derived from the word plug valve. It’s an opening and closing part that acts as a ball, which rotates 90 degrees around the axis of the valve stem to achieve the purpose of opening and closing part, allowing fluids to flow through it.



Used in various plumbing setups and vehicle and cooling systems in industries. Also used in oil and natural gas industries to control pressure and flow and shut off impure fluids. Used in water treatment industries.


Special features and speculations  

The motorized ball valve consists of a two-way brass valve. It also includes an on/off type actuator. It is highly marketable because of its vital function, small size, and reliable performance. Has pressure resistance, temperature resistance, corrosion resistance, and a wide application range. They leak proven and can work under high temperatures.


Top-rated items of the product

It comprises brass, bronze, copper, iron, stainless steel, PVC, and CPVC materials.

ball valves actuator
ball valves actuator

Motorized Control Electric Motor Valves

Motorized control electric motor valves are a crucial part of any water system. These devices allow for automatic control over the flow and pressure of water, ensuring optimal performance and efficiency in various applications. The motorized valve is composed of an electric motor, which is used to open and close the valve, and a positioner that controls the action of the valve. This device can be utilized for industrial applications such as process cooling systems, wastewater treatment plants, fire-hydrant systems, and many others.

The primary benefit of using motorized control valves is their ability to automate processes without requiring manual intervention from operators or technicians. This allows operators to focus on other aspects of their operations while continuing to monitor the performance of their system remotely or from afar. In addition, these devices offer precise flow rates and accurate regulation regardless of changes in pressure or temperature.

Benefits of Motorized Valves

Motorized valves are an essential component of water systems, providing automated control to ensure safe and efficient operation. These valves offer numerous advantages over manual models by using electric motors to drive the valve’s movement. Here are some of the key benefits of motorized valves for water systems:

Firstly, motorized valves provide precise adjustment capabilities. They can be programmed with a range of settings that allow for accurate control over the rate and direction of flow in a system. This makes them ideal for regulating pressure or temperature in water lines and protecting against flooding or hazardous substances entering the system. In addition, these valves are much more reliable than their manual counterparts since they reduce potential human error.

Furthermore, motorized valves require minimal maintenance due to their self-contained designs, which protect internal mechanisms from corrosion and dirt buildup.

Types of Motorized Valves

Types of Motorized Valves can be a difficult choice when controlling water flow. They provide an automated solution for regulating fluid movement and are used in many industrial, commercial, and residential applications.

The most common type of motorized valve is an electric motor valve, which consists of an electric motor connected to a manual control or actuator. This system allows for precise control over the flow rate, pressure, and angle of the valve opening or closing. Another type is a pneumatic motor valve, which uses compressed air instead of electricity to operate its solenoid-actuated diaphragm mechanism.

Installation Process

Installation of a Water Motorized Control Electric Motor Valve is simple and efficient. Firstly, it is essential to review the manufacturer’s instructions to ensure that the installation process is carried out correctly. This will also help to reduce any potential risks associated with inadequate fitting.

The electric motor valve should then be securely attached to both sides of the pipe using appropriate sealing materials to prevent leakage. It should be connected using cables and wiring according to the relevant safety regulations. Once completed, the electrical control box should be mounted near the device and wired into place. After this has been accomplished, a thorough testing procedure should be undertaken to ensure that all components are functioning correctly before use.

Advantages of Water-Powered Motors

Water-powered motors are becoming increasingly popular as a cost-effective and energy-efficient alternative to traditional electric motors. As a result, many industries are now turning to water-motorized control electric motor valves for their operations. These valves provide numerous advantages, making them an ideal choice for industrial applications.

First, they require significantly less energy than electric motors, reducing the electricity needed to power machinery and equipment. Businesses don’t have to invest in expensive electrical infrastructure or worry about high electricity bills. Additionally, these motors generate less heat when compared to electric equivalents, which helps reduce the risk of accidents due to fire hazards or overheating components.

Furthermore, water-motorized control electric motors are highly reliable and durable as they do not suffer from wear and tear like traditional engines.

Potential Issues with Water-Powered Motors

With the focus on renewable energy sources, many companies are looking to water-powered motors as an efficient and cost-effective way to electrical power components. Water motorized control electric motors valves (WMV) provide a reliable source of control for various fluid systems. However, some potential issues come with using WMVs in specific applications.

One potential issue is the risk of corrosion from electrolysis, which can be caused by improper grounding or excess voltage fluctuations in the water supply. Corrosion can lead to decreased performance and even permanent damage to the valve if left unchecked. Additionally, WMVs have limited flow rates and require regular maintenance to keep them running efficiently. This includes cleaning out sediment buildup and checking for any leaks or blockages that could cause problems with system performance over time.


water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

water valves in plumberstar
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC, and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting,adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Plumberstar valve is mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Why Choose Plumberstar Valves and Manifold?

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

Professional. Our team has rich experience working with water and gas projects for about 15 years; meanwhile, Plumberstar has worked with a few top 10 worldwide customers for five years.

Offer. Plumberstar provides competitive prices and economic projects according to customers’ inquiries. Our spare parts and accessories sourcing is much better and competitive because we have heavy quantities and good free cash flow.

Quality. Plumberstar quality is our life to survive, and there are three times random inspections and final QC report, emergency action system within 48 hours. The inspection report will be provided to customers by each PO.

Customize-Design Brass Copper Fitting

Plumberstar Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing
stainless steel insert and adapter and copper rings. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of Lead-Free DZR brass for a durable fitting that is also corrosion resistant
quality and performance is field-proven with more than 350 customers.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. Custom-Made and samples are free.

MOQ and Delivery – Lower MOQ even reach 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production, OEM, and ODM both available.

Non Disclosure Agreement – Plumberstar will not provide the same valves and manifold to your competitors. and help you to get more market shares, then we can sign an exclusive agreement

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order, free replacement if any is damaged, updated hot-sales items recommendations

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchasing with competitive cost of valves and sanitary ware items. You get better prices for winning more in markets

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why choose brass valves from Plumberstar?

There are many reasons to choose brass valves over other types of valves. Brass is a highly durable material that can withstand high temperatures and pressure. It is also resistant to corrosion, making it an ideal choice for use in wet environments. Brass valves are also easy to clean and maintain, which is an important consideration for busy households. Plumberstar brass valves are some of the most reliable and durable on the market. Plumberstar valves are easy to install and come with clear instructions.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?