|
| Thermostatic Radiator Valve Head The thermostatic radiator valve head has a part inside that can sense temperature and a valve core that controls water. It can work by itself or be adjusted by hand to change how much hot water flows into the radiator, based on the room temperature. It can be connected directly to common radiator valves and works with different smart heating systems. This product is used in homes, offices, hotels, and other buildings.
|
|
| Heating Radiator Lock Shield Valve The heating radiator lock shield valve has a special lock inside. It can only be opened or adjusted with a matching key. This helps stop other people from opening or closing the valve by themselves and taking hot water without permission. The water path inside the valve is smooth, so water can flow easily with little loss. It helps control the hot water going into the radiator in a steady way. Some models also have flow scale marks, which make it easier for technicians to adjust the heating system and keep water flow balanced.
|
|
| Rod-type Temperature Cut-out Thermostat This rod-type temperature cut-out thermostat uses a straight metal probe to feel temperature changes. The probe can be put directly into water, air, or gas to check the temperature at any time. It reacts fast and gives stable readings. There is a simple switch inside. When the temperature is safe again, it can be reset. It works on its own and does not need extra power. This helps stop overheating and protects the equipment during use.
|
|
| Anthracite Constant Temperature Angle Valve The anthracite constant temperature angle valve has a temperature-sensing core inside, which helps keep the water temperature steady. Meanwhile, its 90° structural design can fit into corner spaces. It is also equipped with a rotary switch, making operation labor-saving and convenient. This product is mainly used for pipeline connections of bathroom equipment. And can ensure a constant outlet water temperature. It is commonly used in home kitchens and bathrooms, and also in hotel bathrooms.
|
|
| Thermostatic Mixing Valve For Water Heater This water heater thermostatic mixing valve keeps the discharge water temperature steady between your preset values, most commonly 38℃ to 45℃. It fits piping for all standard gas and electric water heaters alike, and you can add optional anti-scald safeguards and flow restrictors to make daily use much safer. Mount it right between your water heater outlet and bathroom fixtures to stop sudden hot water burns.
|
|
| Solar Water Heater Thermostatic Mixing Valve The Solar Water Heater Thermostatic Mixing Valve can address issues such as large water temperature fluctuations. And uneven hot and cold water caused by differences in sunlight for solar water heaters. It can adapt to outdoor installation environments exposed to sun, rain, and other weather conditions. It is compatible with the working conditions of solar energy systems. It is mainly installed at the water outlet end of solar water heaters to ensure a constant temperature of water used at terminals.
|
Circular Hydraulic Manifold
Circular Hydraulic Manifold
The Circular Hydraulic Manifold has a round shape that lets water flow evenly to many outlets. This makes it easy to install pipes in a neat and central way. Each branch is equipped with an independent control valve or flow meter, which can adjust the flow rate and pressure of water in each branch. It is often used in heating systems. The manifold sends water evenly to all parts, helping everything work together at the same time.
- Model No.: JX-10010
- Inlet/Outlet Diameter: 1 inch
- Extra connector: 1/2 inch female thread
- Material: Stainless Steel 304
- Power: 50 kW
- Number of Circuits: 3
- Max Working Temperature: 110℃
- Max Working Pressure: 6 bar
- Inter-circuit Spacing: 125mm
- Installation method: on the wall
- Total Weight (Net Weight): 4.3 kg
- Free sample
- surpport ODM/OEM
- Technical test reports can be provided
Yes, we provide one-stop solutions for Circular Hydraulic Manifold projects. Share working parameters and design requirements; sketches or samples can shorten development time by 15 working days. We manage the whole process from design to mass production.
Six full-time engineers confirm dimensions and create CAD & 3D drawings. OEM/ODM orders account for 90% of our business. We make 3–5 prototype samples for your testing before bulk production. We support material adjustment, custom packaging, and logo printing.
We build 3D models to adjust product designs. We use these models to spot any flow or structural problems. All this work wraps up twenty days before mass production begins. We can steer clear of avoidable losses. This keeps waste down on our production line.
2. Are third-party inspections allowed for Circular Hydraulic Manifolds?
Yes, third-party inspection for Circular Hydraulic Manifolds is allowed. Kindly inform us 7 working days in advance to arrange finished goods and documents for on-site checking before shipment.
We have 15 dedicated quality control members on our team. Each batch gets checked starting from raw materials, followed by 8-bar leak testing and a 48-hour salt spray test. Our internal laboratory also carries out hydraulic performance tests and material composition analysis when needed.
Our inspectors can verify product dimensions and raw material composition right here at our factory. They can also test pressure resistance and sealing performance. We are able to supply full production documentation. Official test reports are available upon request. Our staff will remain on hand to offer full support during the entire inspection.
3. Do you run hydraulic tests on the Circular Hydraulic Manifold before dispatch?
Each Circular Hydraulic Manifold will go through hydraulic testing before being dispatched. Each unit goes through water pressure checks, air tightness testing, and mechanical strength verification.
The maximum working pressure of this manifold is 6 bar. We apply test pressure at 9 bar, equivalent to 1.5 times working pressure, and maintain pressure for 3 minutes to check for leakage and deformation. The product is made of 304 stainless steel with 3 circuits and 125mm inter-circuit spacing.
Each qualified manifold is attached with an independent test record containing complete test parameters. We can provide these official test reports to you free of charge.
4. What shipping options do you offer for Circular Hydraulic Manifold orders, whether LCL or FCL?
We arrange sea shipments of Circular Hydraulic Manifolds for both FCL and LCL orders. Our factory turns out 3000 tonnes of products every year, and we ship roughly 20 full containers each month. Customers ordering full containers get more favorable unit prices. Typical lead times run from 25 to 35 days, and cargo sustains fewer risks of damage while being transported, which makes FCL a solid pick for large engineering works and bulk stock top-ups.
When your order is not large enough for a full container, LCL shipping is available, with a minimum order quantity of 500 pieces. It reduces your initial capital outlay and suits trial runs for customized products. We can also arrange split deliveries to as many as three separate addresses if you require. Generally speaking, LCL shipments take 30 to 45 days in transit, subject to the chosen shipping route.
We have worked closely with multiple freight forwarders for many years to handle both shipping options. Just let us know how many items you plan to order and when you hope to receive the goods. We can then assess and recommend the shipping way that delivers the right mix of affordable rates and stable transport for your project.
5. Can you provide the DDP terms for the Circular Hydraulic Manifold?
Yes, we offer DDP door-to-door service for Circular Hydraulic Manifolds. We complete export paperwork, handle destination customs clearance, and bear all import duties and taxes. No extra fees will be charged to you when the goods arrive. The service is available for both LCL and FCL shipments.
Please share your full delivery address no later than 7 working days ahead of loading. For our standard DDP service, inland trucking can reach destinations within 250 km of the arrival port. Total transit normally takes 30 to 45 days, which will change according to shipping route and whether you select FCL or LCL. We calculate all transport charges by taking your order quantity, destination port, and real inland travel distance into consideration.
Send us your order quantity and exact warehouse address. We will prepare a fully itemized DDP quotation and send it to you within 2 working days.
6. What other market support can be provided to wholesalers besides the Circular Hydraulic Manifold?
We offer comprehensive market support to wholesalers beyond supplying Circular Hydraulic Manifolds. We provide complete OEM & ODM service, including laser logo engraving. Six full-time engineers support custom design, CAD, and 3D drawing development for your personalized products.
We can supply free sales samples together with official test reports for your reference. Every manifold is covered under a 3-year warranty, helping you stay competitive within your local market. We work alongside several freight partners. This lets us offer various shipping solutions. Just share your order volume and expected delivery schedule. Our team will check all costs and transit times thoroughly. We will then recommend the most cost-effective shipping way to fit your project needs.
We can adjust order arrangements according to your sales cycle. Our team shares practical product selling points and technical data. Feel free to contact us if you need extra promotional materials to expand your local wholesale business.
7. How to deal with price fluctuations of raw materials for Circular Hydraulic Manifolds?
Plumberstar has mature countermeasures to handle raw material price changes for Circular Hydraulic Manifolds. We continuously maintain 80–100 tons of 304 stainless steel safety stock to buffer short-term market swings. Our purchasing team monitors real-time metal market prices every working day to judge market trends in advance.
If raw material costs rise significantly, we will send formal price adjustment notifications at least 15 working days in advance. All orders confirmed via signed contracts will follow the agreed price. There will be no sudden price increases within the agreed 45-day delivery cycle, even for orders starting from the MOQ of 200 pieces.
For regular bulk clients who place more than 5,000 pieces every quarter, we are ready to negotiate quarterly fixed-price arrangements. On top of that, we consistently refine our casting and machining procedures to keep production material waste under 3%. These ongoing efficiency upgrades allow us to take on part of the cost pressure caused by shifting raw material prices.
