Motor Actuator 230v 24v AC

Parameters of Motor Actuator 230v 24v AC

It is suitable for HVAC and status control of the water system. The valve body is adopting the ISO228 standard platform, the actuator’s using a synchronous machine that drives the gears steady.

Additional information

Materials:

CW617N, H58-3

Finising:

Sand blasted, Sand blasted and Nickel plated

Size:

1", 1/2", 3/4"

Thread connection

BSP, NPT

MOQ:

100pcs, 200pcs

Action time

15s

Drive Power

220VAC, 24VAC

Medium temperature

2 ℃ -95 ℃

Lead time:

30 days

Warranty:

12 months, 24 months

Details about Motor Actuator 230v 24v AC

Water Motorized Control Electric Motor Actuator

JX-0325

  • Type: DN15, DN20, DN25 (optional)
  • Voltage: 24v,220V,230v, 50/60Hz
  • Power: 60W
  • Cable Length: 300mm / 11.8in
  • Working Time: 25-30 seconds
  • Torque Force: 3.5 N.m
  • Torque:12 Nm
  • Medium: Water, Air, etc.
  • Medium Temperature: 15 – 95℃
  • Closing Differential Pressure: ≤0.6Mpa
  • Nominal Pressure: PN16-PN20

Unleashing the Power of Motorized Ball Valve for Seamless Flow Control

Are you looking for constant and automatic flow control? Look no further because our motorized ball valve is here!

Yes, with guaranteed strength, our automatic ball valve is also reasonable and cheap. Of course, under your hand at ease. The electric ball valves become a time favorite. They are easy to use in homes as well as in industries.

Working and Execution of motorized ball valve

Motorized ball valve became famed due to its self-control property. It can start with a tiny signal of induced electricity. It can open and close the flow through valves within no time.

The ball valve works in a controlled and mechanical manner with an electric signal. That is why it is also called a motorized ball valve.

Automatic Powered Levered Ball Valve from EcoNet Controls

Automatic Ball Valve Product Details

The making of the automated ball valve of – a ball valve and -an electric actuator. So, the motorized ball valve’s quality depends on the material of its parts.

The core material in the composition of the ball valve is stainless steel. The lead-free ball valve makes it safer for the flow of drinking water.

The motorized ball valve uses gas or liquid as the primary flow media. The flip interval of the switch is 3 to 5 seconds. This factor makes flow easy without breaking through our ball valve.

The rotations for the electrical ball valve are bi-directional. The capacity ranges between 80,000 to 100,000 cycles per ball valve. This quality makes your buy of this high-quality tool worthwhile.

The automated ball valve has a significant effect due to its manufacturing properties. Our ball valve is reliable for domestic as well as commercial use.

The rate of body cases is IP65, which means that it is leaf-proof in the case of water. The risk of electric shock due to the water flow is safe and protected. We assure you of your safety with our product’s longer life span. So the choice of our electric ball valve will never disappoint you.

Leading Products

We always put our clients’ happiness first. That is the reason our products are easy to install and run with pace.

ABC model valve is one of our leading products. It is simple to use and fair in price. Our other most demanding product is water valve. This product works at the lowest pressure and power. This quality makes it a favorite for home automation systems.

OEM and Buying Advice

Our company provides motorized ball valves of different sizes and shapes. These are according to your needs and requirements.

We also provide the facility of OEM. The custom-made options in our automatic ball valves make it fit for every situation.

Why Choose an Electric Motor Actuator? Unmatched Excellence

One of the primary reasons that you should choose our products is the excellent cheap rates. We provide the best results of our products. This is because we have done several tests on our product before delivering it.

Our ball valve’s wide range of power options makes it more affordable and unique in terms of working. So we provide what you need on one platform for sure.

Moreover, choose our lead-free ball valves for water or food line applications.

motorized ball valve drawing
motorized ball valve drawing

Types of Motor Actuators

Motor actuators are a type of machine part used to convert energy into motion to control and adjust the movement of objects. Motor actuator 230v 24v AC is an electromechanical device that combines electric motors with mechanical components for faster, more precise motion control.

This type of motor actuator can be found in many applications, such as agricultural machinery, robotics, and industrial production lines. It consists of an electric motor connected to a gearbox, which increases torque and reduces speed to provide powerful output for application-specific tasks. The 230V-24V AC power supply allows it to operate efficiently while providing reliable operation over extended periods.

Several types of motor actuators are available today, including linear motors, rotary motors, stepper motors, and servo motors.

Advantages of 230V 24V AC Actuator

The 230V 24V AC Actuator Motor is ideal for businesses and organizations looking to increase efficiency. This motor can be used in various applications, from HVAC systems to automated machinery. It offers advantages over other motors, such as increased reliability, safety, and cost-effectiveness.

The 230V 24V AC Actuator Motor controls the electrical current sent to the motor. This allows it to respond accurately to changes in speed without wasting power or creating additional strain on the system. Its high torque output also means it can easily move heavier loads than many of its counterparts. Its design also prevents electrical arcing, which adds to its durability and reliability.

DC24,DC12V Actuator

DC24 and DC12V Actuators are motor actuators designed for high-power applications. They can provide precise control over the speed and torque of a motor, allowing for accurate manipulation of its direction and position. These actuators can work on both 24-volt DC and 12-volt DC power supplies and thus can be used in various industrial settings.

The design features an integrated controller with onboard feedback circuitry that allows for accurate device performance. It also has adjustable current regulation, allowing users to adjust the amount of current going into a motor to suit their needs—making it great for specific applications with demanding requirements. Additionally, these actuators have excellent shock resistance capabilities due to their increased durability, meaning they can withstand impacts without compromising their performance or reliability.

Applications of Motor Actuators

Motor actuators are devices used to convert electrical energy into mechanical energy, enabling the automation of various processes. The Motor Actuator 230v 24v AC is a versatile device in many applications. This motor actuator uses AC voltage and is equipped with overload protection, thermal protection, and IP65-level water resistance for durable performance.

The Motor Actuator 230v 24v AC can be employed in numerous industrial applications, including control valves, pumps, conveyors, and fans. It can also be used for automated assembly lines and other machines requiring precise motion control. Furthermore, this motor actuator is compatible with systems such as PLCs (Programmable Logic Controllers) or PID (Proportional Integral Derivative) controllers for better results.

electric valves
electric valves

A motorized ball valve exists as a valve that converts electric energy to kinetic energy using a single liner or rotary motion found within the valve. The electric actuator is the main motorized valve that aids in opening and closing the ball valves, which respond to commands from the remote control systems. In most cases, the motorized ball valves work with mediums such as steam, water, gas, air, and oil.

Applications

A motorized ball valve is a valve that aids in regulating the flow of fluids or gases with a rotating ball attached to an actuator.

Social Features and Specifications

Valve: -4 to 266°F (-20 to 130°C)

Actuator: -4 to 158 °F (-20 to 70°C)

Valve body: 600 psi (41.36 bar) non-shock cold working pressure.

motorized ball valve with 3 way functions
Motorized ball valve with 3-way functions

The ball valve is a device to control the flow of liquids or gas. The device operates similarly to the manual ball valve. It has a ball set in the valve’s body and a hole in the center to control the flow. The open ball valve has a borehole that is in line with the water flow. When the ball is turned perpendicular, it closes the valve, stopping the flow. With the motorized ball valve, the external leakage is entirely blocked. It also makes it easy to control internal leakage. A hydraulic actuator rotates our automatic control valve.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC, and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting,adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Plumberstar valve is mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

At Plumberstar, we boast 15 years of expertise in water and gas projects, and long-term partnerships with top global clients.

We offer competitive pricing and tailored solutions, thanks to our high order volumes and provide flexible solution

Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Plumberstar Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing
stainless steel insert and adapter and copper rings. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of Lead-Free DZR brass for a durable fitting that is also corrosion resistant
quality and performance is field-proven with more than 350 customers.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. Custom-Made and samples are free.

MOQ and Delivery – Lower MOQ even reach 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production, OEM, and ODM both available.

Non Disclosure Agreement – Plumberstar will not provide the same valves and manifold to your competitors. and help you to get more market shares, then we can sign an exclusive agreement

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order, free replacement if any is damaged, updated hot-sales items recommendations

Radiator works with a man

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchasing with competitive cost of valves and sanitary ware items. You get better prices for winning more in markets

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

There are many reasons to choose brass valves over other types of valves. Brass is a highly durable material that can withstand high temperatures and pressure. It is also resistant to corrosion, making it an ideal choice for use in wet environments. Brass valves are also easy to clean and maintain, which is an important consideration for busy households. Plumberstar brass valves are some of the most reliable and durable on the market. Plumberstar valves are easy to install and come with clear instructions.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?