|
| Angle Type Safety Valve This angle safety valve protects small boilers and heating equipment. It is made only for safety use in these systems. Integrating overpressure protection, system venting, and impurity discharge in a single unit. Its 90°-angled flow path design is ideally suited for installation in tight spaces, at corners, or alongside equipment. The valve allows pressure threshold calibration to meet specific system requirements. It regularly flushes dirt out of pipes. This keeps the whole system working well.
|
|
| Water heater safety group This water heater safety pack is one compact piece. It combines four parts: safety valve, pressure control valve, auto air vent, and drain port. It does four key jobs at once. It eases excess pressure, adjusts water pressure, lets trapped air escape, and washes away dirt from your water heater. The green knob adjusts the safety valve’s set pressure. It meets the pressure-safety requirements of different water heater models. All connections use universal specs. You can pair them directly with water heaters or heating pipelines, making installation easy.
|
|
| Brass Boiler Safety Valve This brass boiler safety valve is a core component for boiler and heating system safety. Featuring a built-in spring-loaded valve core. It pops open on its own. It releases extra water pressure once the pressure goes over the set limit. Its bright red top knob lets you turn and tweak the preset pressure by hand. You can match the safe pressure needs of various boilers and heating setups easily. It fits many common heating setups, from household wall-mounted boilers to small industrial hot water units.
|
|
| Bronze Safety Relief Valve This bronze safety valve has a spring core inside. It pops open by itself to let extra pressure escape. Its top-mounted handle enables manual pressure relief actuation. Designed for regular functional testing of the valve to ensure reliable operation at all times. It is an essential safety protection component for a wide range of industrial applications.
|
|
| Plastic Basket Pedal Spring Check Valve This plastic basket pedal spring check valve is used in drainage and low-pressure wastewater systems. It is common in civil buildings and light industrial use. The valve is opened and closed by a pedal from the outside. Inside, there is a basket filter. The filter helps catch solid waste and debris in the water. A spring helps the valve return after use. This helps stop sewage from flowing back, reduces blockage, and keeps the pipe system cleaner during daily operation.
|
|
| Brass Check Valve With Plastic Filter This brass check valve is used in water pipe systems. It has a plastic filter inside at the inlet side. The valve body is made of brass and is used for normal water pressure. Water flows in one direction only. It does not go back. The plastic filter helps prevent dirt, rust, sand, and other small particles from entering the water. This helps keep the pipe cleaner and reduces trouble during daily use of the system.
|
Angular Globe Fire Angle Valve
Angular Globe Fire Angle Valve
This is our angular globe fire angle valve for fire service pipeline flow control. Made of epoxy-coated cast iron with a stainless steel stem and a cast iron handwheel, it connects fire pipes via standard grooved ends. It cuts off or regulates fire water flow at an angle and stops pipeline leaks. Quick installation fits common fire piping without extra parts. It handles regular working pressure and temperature. It keeps tight, long-lasting sealing for fire protection systems.
- Model No.: JX-10122
- Size:2-1/2″
- Body Material: Ductile Cast Iron
- Steering Wheel Material: Aluminum
- Body Material: Ductile Cast Iron
- Working Pressure:1.6Mpa
- Breaking Pressure:6.4Mpa
- Height:185mm (Open)/160mm (Closed)
- Length:137mm
- Weight: About 1.3KG
- OEM and Custom are available
- Free samples
- Free inspection report
1. What advantages can you gain by partnering with Plumberstar for the Angular Globe Fire Angle Valve?
You gain obvious cost advantages to boost profit steadily. We own full in-house production workshops and centralized raw material procurement channels. We buy brass, cast iron, and key materials in bulk. It lowers raw material costs from the start. No extra markup from middlemen or distributors. We offer direct factory prices for big project orders and regular wholesaler replenishment alike. Our fire angle valves feature identical materials and workmanship, yet cost less than goods sourced from traders. You enjoy flexible pricing for retail sales and project bidding with ample profit margins.
Controllable production capacity and stock guarantee a stable supply throughout your business cycle. Popular standard items are kept in safety stock for quick, small-batch delivery without production lead time. We prioritize large urgent orders for real estate and fire projects by adjusting workshop production plans. We work closely with long-term raw material suppliers. This helps us lock enough materials amid tight supply and rising prices. It avoids delivery delays and order losses from stock shortages.
We keep updated on industry codes and market trends to help you seize business opportunities. Our R&D and QC teams follow updated global fire codes and new piping trends. They upgrade products to meet the latest standards. Our partners receive updated compliant products sooner than rivals. They can update catalogs, join tenders early, and expand local sales for a higher market share.
2. Can I request samples for the Angular Globe Fire Angle Valve before placing orders?
Samples are available before bulk orders. You may be an overseas wholesaler exploring new markets. You could also be a local distributor hunting fresh stock, or a fire contractor bidding on construction projects. Pick fire angle valves suited to local pipe norms and project requirements. Real samples stop you from ordering large batches just from photos and data. This keeps you from losing money on faulty or leftover stock.
We supply free samples for all regular in-stock products. Customers only pay for delivery. No extra hidden sample costs apply. Selected samples get packed and dispatched the same day for regular sizes. We send small samples by speedy international courier. We combine several big samples into one box. This cuts your overall shipping expense.
We check the check valve’s material and thread fit right after delivery. We also test how smoothly the handle moves and run quick water pressure tests on site. We only start large production once the samples pass all checks. If a sample fails to meet local standards or doesn’t fit for installation, we will replace it right away. This helps you avoid extra costs for rework and return shipping, and saves precious time for your projects.
3. How does the Angular Globe Fire Angle Valve’s stem and disc work reliably under pressure?
This Angular Globe Fire Angle Valve has a one-piece forged carbon steel stem. There are no weld lines on it, so it won’t crack or break under strong water pressure. We made the stem thicker to fit regular fire pipe pressure rules. It stays firm and never bends or shakes when pressure surges or water keeps rushing through. The outside of the stem is smoothly machined and polished, so it fits the soft seal parts perfectly. When you turn the wheel to move the stem up and down, it glides easily and never gets stuck. You can open and close this valve thousands of times for years. Its threads won’t wear down or slip, and every use feels smooth all the time.
A small metal clip locks the disc firmly to the valve stem. These two parts stay connected tightly, so rushing water can’t move or twist them. We made the disc a little thicker on purpose. This spreads water pressure evenly and stops the disc from bending. The sealing surface is polished super smooth. When you fully close the valve, it presses tightly against the base. Even if the pipe pressure spikes suddenly, the seal stays shut and no water leaks. The valve stem only moves in a set range. Strong water pressure will never push the disc up or flip the valve open or closed accidentally.
We add modest gaps to the stem and disc assembly. Thermal expansion or shrinkage caused by temperature shifts will never jam the valve. We install heavy-duty waterproof composite gaskets. These gaskets counteract the axial push of water pressure and prevent leaks along the stem. Every moving part passes pressure and fatigue testing before shipment. This valve works on standby nonstop inside fire pipelines. Its disc stays firmly in place, and sealing parts do not wear out quickly. You almost never have to take the valve apart to replace gaskets or adjust travel limits. This noticeably cuts routine on-site inspections and maintenance jobs.
4. Can you provide technical drawings and specs for the Angular Globe Fire Angle Valve?
We provide full technical drawings and product specs for free once your cooperation is confirmed. No drawing or filing fees apply at all. Overseas importers, project general contractors, and private-brand agents need compliant technical paperwork. These documents help with your essential admin work. These documents serve your essential formal tasks. These papers can handle most of your routine administrative work. You can use them to finish various official procedures, such as bid assessment, customs clearance, local fire safety certification, and internal inventory archiving. Attached are the test data checked by our factory. These papers note all key product details and sizes, with full product info sorted out. Our documents list all the important product numbers. They spell out the main specs clearly. Every number comes straight from the finished parts we make in bulk. The final data meet international bidding and official filing rules.
We offer technical documents in various adjustable formats based on your needs. Standard PDF drawings and spec sheets get sent quickly. You can download and print them for filing and official submission. We share original CAD files if you plan to product redesign or customized end connections. Your in-house engineers rely on these files to work out precise pipeline layouts. All drawings match our current production standards. It keeps drawing data consistent with shipped products. This rules out dimension errors when fitting pipes and installing on-site.
We can quickly revise your supporting drawings and specification sheets. Changes to raw materials, product sizes, or production processes will prompt these updates right away. The updated documents will be sent directly to your email address. You can use these newest files directly for repeat purchases or new project bids. There’s no need to recheck technical parameters or apply for documents again. This saves extra paperwork work for your administrative and engineering teams, and also speeds up your restocking work and bid preparation procedures.
5. What certifications are available for the Angular Globe Fire Angle Valve?
We get all our fire angle valve certificates from official test labs. Every certificate matches our own made products; we never borrow papers from other factories. These papers help domestic buyers submit bids and overseas partners clear customs or pass local fire checks. Our valves have China 3C, CE, and UL certificates. You do not need to spend extra money to test goods and apply for new papers.
Our valves are certified with China’s mandatory 3C approval, a must-have document for domestic building works and fire safety acceptance checks. We produce every finished valve fully in line with certified standards, so official random inspections will never be a problem. For export orders, we can supply certification files that meet your target region’s regulatory demands. Shipments bound for Europe include CE certificates, North America orders come with UL certification, and goods going to the Middle East and Southeast Asia are furnished with locally valid qualification paperwork.
We will attach free electronic versions of all certificates along with your product documents. You can print these copies directly for bidding work or customs clearance needs. Should you require physical hard copies with official stamps, we are able to post them out to you. Whenever we adjust raw material sources or production processes, we carry out new annual testing to maintain certificate validity. These valid credentials can be reused freely for repeat orders and new project tenders whenever you need them.
6. What warranty applies to the Angular Globe Fire Angle Valve?
The warranty for your grooved fire angular globe valve starts the day you get it. It covers factory-made problems like body cracks, leaks from casting holes, or broken original disc seals for free. This warranty only works if you install the valve according to official fire safety rules, and use it within the pressure and temperature listed on its nameplate. We won’t pay for damage from forced fitting, changing the valve body without permission, or using too high water pressure.
Handling valid warranty issues is simple and hassle-free. We arrange courier delivery of small replacement components at no cost immediately. If the main valve suffers damage, we first verify your order information and the actual photos you provide. We cover delivery charges and ship a brand-new valve to you directly. You do not need to spend money on spare parts or return freight. There is also no need to wait for slow third-party inspection approvals.
We keep offering after-sales assistance even past the warranty period. Valve cores, rubber gaskets, and other original spare parts are only charged at raw material prices, with no additional service fees added. You can contact us anytime to get free technical guidance for reorder selection or on-site installation issues. Long-term regular customers can also enjoy special, exclusive after-sales benefits.