Ball Valve 2 Piece Types

Parameters of Ball Valve 2 Piece Types

A ball valve is a shut-off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore

Additional information

Finising:

Sand blasted

Handle:

Iron with sleeve, Stainless steel with sleeve

Life time:

150000 times On-Off

Materials:

C37700, CW617N, Lead-free brass

Size:

1", 1/2", 3/4"

Temperature:

-10˚C-120˚C

Thread connection

BSP, NPT

Working pressure

600WOG

Warranty:

24 months

Details about Ball Valve 2 Piece Types

Ball Valve 2 Piece Types

JX-0422

  • Ball valve definition
  • Product Features: Nickel-Plated Brass body and cover
  • Chrome-plated Brass ball
  • PTFE Sealing Ring
  • Easy to install and operate
  • Long service life
  • Resistant to low temperature, humidity, and mechanical impacts
  • Applications:cold-hot water installations, oil, and explosive gasses
  • Temperature: Min. -10℃ / Max. +110℃
  • Suitable for water supply systems, civil construction piping systems
  • 90-degree valve closing range, the handle can close the valve by rotating it to either side of the valve body

    Water ball valve

    Size

    DN15,DN20,DN25

    Pressure range

    600WOG

    Materials

    Brass,CW617N,C37700,Bronze

    Type

    2 pc with outlet valve

    Temperature:

    0℃ To +115 ℃

    Sealing;

    NBR, PTFE

    Finish

    Sandblasted

    Thread;

    BSP, BSPT, NPT
  • Why do we use ball valves?

  • They may be considered general-purpose flow control valves used for high-temperature applications. As the name suggests, ball valves use a ball to control the flow of substances from one opening to the next.

Brass ball valve

  • Introduction product.

The ball valve is the most common gas control system used to regulate and control methane, natural gas, or propane. It enables users to quickly set temperature applications with high precision using only one input device (in this case – hand). The brass body ensures long durability while preventing rusting, even when exposed to harsh conditions like rainstorms!

  • Applications

Consider brass if you need an automatic ball valve to regulate pressure in your system. It has been used for centuries and can ensure smooth operation with low maintenance costs.

The following are fixtures that use a brass ball valve:

The valves come in many different styles. For example, liquid flow control valves are used for controlling fluids like oil or water with precision and accuracy while still allowing them through when necessary to meet demand levels at any time during operation.

  • Ball Valve Overview

    Ball valves are valves used to control the flow of fluids. They feature a round, hollow ball with a hole drilled through it that controls the flow of material. Ball valves are used in many industries and come in two types: two-piece and three-piece designs.

    Two-piece ball valves are often used for on/off applications as they are compact, easy to install, relatively inexpensive, and maintenance-free. The two pieces consist of a body and a closure member. They provide tight shut-off when closed and have good sealing properties even after long periods making them well-suited for controlling water, steam, or oil applications in both industrial and household settings. Their robust design allows them to handle higher pressures than other valve types, such as gate or globe valves. Additionally, they can be automated easily using an actuator allowing remote operation if necessary.

    Type 1: Floating Ball Valves

    Ball valves are an essential component of any plumbing system and come in various types. One type is the floating ball valve, a two-piece fitting used to control the flow of liquids or gases. These valves are commonly used in water systems, petroleum pipelines, and chemical processing plants.

    Floating ball valves feature two main components: the body and the ball. The body is typically brass or stainless steel and contains ports that allow fluid flow. The ball’s spherical shape allows it to rotate freely within its socket as liquid flows through it, controlling the flow rate by adjusting how far open or closed it is. Floating ball valves are easy to install and maintain due to their simple design; however, they require frequent maintenance due to their susceptibility to wear over time from repeated use.

    Type 2: Trunnion Ball Valves

    The ball valve is a popular and versatile component used in many industries to control the flow of liquids. One common type of ball valve is the two-piece trunnion ball valve. Trunnion valves are designed with an extra support feature, a trunnion mounted between the upper and lower sections of the valve body, providing more stability under extreme pressure or temperature fluctuations. With this additional support, trunnion ball valves have become a preferred choice for large-scale pipelines, oil refineries, chemical processing plants, and other demanding industrial applications.

    Trunnion valves are available in both floating and fixed designs. The construction of these valves allows for minimal operating torque even when fully open or closed, which helps reduce wear on internal components over time.

    Design Differences between Ball Valve 2 Piece Types

    The two main ball valve two-piece designs are floating and trunnion mounted. While both have a similar function, they differ in construction and operation. It is important to consider the differences between these two designs’ features.

    Floating ball valves are constructed from two bodies connected by a single stem. They offer a simple design that requires less maintenance than other valves, such as gate or globe valves. The valve allows the ball to move with pressure changes in the pipeline. In contrast, trunnion-mounted ball valves use two springs to control the ball’s movement within its enclosure; this design ensures smoother flow and prevents leakage in environments where the pressure may fluctuate often.

    Installation Considerations

    Several installation considerations need to be made when considering the purchase of ball valve 2-piece types. The first consideration is the type of pipe material used for the installation. Depending on the environment and specific requirements, different materials should be used, such as brass, carbon steel, or stainless steel. Also, various connection types can be utilized, including threaded, socket weld, or butt weld connections.

    The second consideration relates to size selection and pressure ratings. To ensure optimal performance and operation, choosing the right size and pressure rating valve is essential based on application requirements. Doing so will eliminate the extra burden or risk associated with system failure due to a wrong choice in sizing or pressure rating. Lastly, compatibility between pipe fittings should always be considered when installing any valve system and other components like pumps or tanks.

    Conclusion

    The conclusion of the article “Ball Valve 2 Piece Types” provides a brief overview of the advantages and disadvantages associated with these two types. The two-piece ball valve offers many benefits, such as cost efficiency, easy installation and maintenance, and robust construction. On the other hand, its design does limit some of its ability to handle pressure spikes and higher temperatures. Additionally, it is more likely to have leakage problems due to its loose fit between components.

    The three-piece ball valve offers more options when it comes to both pressure handling capabilities and temperature resistance. Still, this increased flexibility comes at a much higher price than the two-piece type. Additionally, while they are better sealed than two-piece valves, they can still be prone to leakage if not properly maintained or installed correctly.

water pressure gauge

Metals Vavles Works on Plumbing System

Plumberstar valve fabricator in China. Our main parts for heating pipelines and intelligent water control can supply you with a one-stop basket solution to get your ideas and demands. From design to packaging and logistics are our duty—brass valves and fittings applied in-house, in industry, and commercial construction, in residential. There are related to water pipe control solution, and we have rich experience for outdoor frostproof hydrant and pex heating water manifold indoor.

The Top Standard Valves

Plumberstar ball Valve is with CW617N and Lead-free original brass. And water flows with 2pc full Port 400WOG and 600WOG standard to design it with heavy-duty. EPDM and NBR sealing washers are environmentally friendly, with Three years warranty with traceability.

Woman's hand closes the valve. Saving Water Consumption Concept
  •  Plumberstar Valve Made from brass and stainless steel 304, and sourcing HPVC ball valve
  • Connected from the thread with BSP(G) and NPT by the normal.
  • Size with MaleXFemale 1/4inch,3/8 inch,1/2inch,3/4,1inch,1 inch,1-1/4 inch,1-1/2 inch,2inch,2-1/2inch,3inch and 4inch.
  • The actuator of electric valve voltage 24V DC and 230V AC
  • Shut-off needle valve can manufacture based on requirements
  • Heating floor manifold with 1-inch gauge and flowmeter
  • Brass nipple, elbow, extension, compression fitting, adapter available

Plumberstar Valves Applications

y drain strainer

Y-filter Strainer Drain Valve

Plumberstar Y filter strainer Keeps Working, and dirty Out Strainer screen catches debris and sediment to reduce maintenance. Protect your water plumbing. Y Type Strainer works in conjunction with your backflow preventer and regulators.

water tanker safety valve

Safety Water Solution

Plumberstar works in residential, irrigation, and commercial application. The relief safety valves are used in various applications, such as water heaters, air compressors, its automatic release of the excess pressure or vacuum from a heating system.

thermostatic valve pump mix water control

Temperature Mixing Valve

Mixing water valve automatic ensure temperature and water pressure stable. It is suitable for household hot water devices equipped and floor heating, so the 3-way valve meets requirements of temperature range and the water flow

radiant pex manifold 12 connector adaptortubing

PEX Heating Manifold

Plumberstar radiant pex manifolds are usual for residential water distribution in a household, and it's top rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures.

Advantages of Plumberstar

Plumberstar products design based on simple structure aim to time-saving installation for consumers and aim to save the cost of customers for building construction.

Play Video about torsion data

We boast 15 years of expertise in water and gas projects and long-term partnerships with top global clients.

We offer competitive pricing, tailored solutions, and flexible solutions. Quality is our cornerstone. We conduct three random inspections and a final QC check for each project, with detailed reports for clients and a 48-hour emergency response system.

Customize-Design Brass Copper Fitting

Copper Pipe fitting 1/2 inch 90-degree Elbow, nipple, bush, and reducer connects PEX Pipe in water distribution and hydronic heating systems.
Low-cost solution to connect copper Pipe Tubing, stainless steel insert, and adapter. The connection system is perfect for your next commercial or homeowner plumbing project.
Brass fittings are made of lead-free and CW602N for durability and corrosion-resistant quality and performance.

brass fitting machine

Advantages for distributer, wholesaler, Supermarket and Trading

Plumberstar is looking for long-time cooperation with partners, our advantage will benefit each other, and growing together, our extra service including design, new tooling, discount and quality tracing system.

★ Moderate Pricing – Plumberstar can provide various projects with different economic basket services. Water control project drawing design and artwork works are free. 

MOQ and Delivery – Lower MOQ even reaches 100 units and sampling time within 15 working days, and the leading time is 30 working days of mass production,

Non-Disclosure Agreement – Plumberstar will not provide your competitors with the same valves and manifolds. And help you to get more market shares.

Quality and Service–Our defect rate reached 0.459% in the last two years from customers feedback, and the Inspection report can provide you with each order

working of a gas shut off valves

Discount and Quantity– Heavy quantity can increase production capacity with effectiveness. And the accessories and spare parts purchased with competitive cost of valves.

Plumberstar Extra Service

Our aim is not only to provide valves but we help customers to design products,design artwork,valve proposal, book shipment,Installation tutorial

Design Valves For House

Valve Project Designing

We are free design your valves according to your inquiry of your plumbing system,no extra cost.

project discussion

Plumbing Control Proposal

We can help you choose valves and heating manifold, and advice in house application

Fix ball Valve

Fluid Control Installation

We can provide an installation guide and tutorial about valves and underfloor heating manifold

loading container

Shippment Service Solution

We help customers to book a container, documents preparation, and clearance, even to warehouse

Frequently Asked Questions

Here are typical questions by customers asked with usual, please feel free contact us if any further confused.

Brass valves have many different types, such as ball valves, garden tap, check valve, strainer, angle valve, gate valve, foot valve, and drain valve. The radiator valve and thermostatic mixing valve are works for water temperature. All of these valves are work for water plumbing systems, plumbing repair, and installation. So have to let water shut-off and shut-on. Some heating systems are related to hot water and cold water mixing for temperature control and stability. Our intelligent valves are functional. There are applications in commercial, residential, and industrial areas.

Underfloor heating radiant pex manifolds are usual for residential water distribution in a household, and it's top-rated in the home building industry. Manifold plumbing systems control hot and cold water that feeds flexible PEX supply lines to individual fixtures. Then water temperature is warm and stable in each room. Meanwhile, the heating accessories-flow meter gauge will monitor water and temperature in each room.

The motorized ball valve works automatically open and closed; they work with 220v-230v AC and 24v DC; they are applications in the heating system, air conditioner,3D printer, and others. The solenoid valve is with similar features.

Would you please submit the form at the bottom of the page or send an email directly:info@plumberstar.com? My WhatsApp: +86 15968648802. Can you send us pressure demands, size package, and quantity if available?

It's able to provide free samples for your evaluation with 15 working days about.

Our MOQ is significantly lower from 100-5000 pcs are available. It depends on different items.
We can fabricate your specified requirements.

It's about 35 days if with regular proucts; New tooling and samples will take 15-20 days, Normal samples will take 7 days.

It means that you need to check the plumbing system at first, then realize your requirements, and get out different valves with different applications and functional with controlling; of course, may be no need to use brass valves due to the high cost. You can use plastic, iron, zinc alloy, and aluminum raw materials instead of brass, but brass and stainless steel are reliable with 3 years warranty. If you don't know how to choose, please call us or email us.

An Instant Quote With Specific

There are 5 engineers and 15 experts about QC&QA behind your projects

Why Choose Plumberstar?

Brass is a highly durable material for valves that can withstand temperatures and pressure. It is also corrosion-resistant, making it an ideal choice for wet environments. Brass valves are also easy to clean, an important consideration for plumbing systems. We manufacture brass valves, which are two-piece brass ball valves with 600 and 400-WOG threaded ends that are not for use in potable water.

Let's discussion your upcoming water control parts?

Simply describe your request and details; our feedback within 24 hours

Get quote Now

Free Sample with OEM

× How can I help you?